618172
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
3
REAR PANEL FEATURES
1. AC IN – Use the included power adapter to connect the
mixer to a power outlet. While the power is switched off,
plug the power supply into the mixer first, then plug the
power supply into a power outlet.
Note: The mixer is designed to work with the included
power supply only. Using an incompatible power supply
could result in damage to the unit.
2. MASTER OUTPUT (RCA) Use standard RCA cables
to connect this output to a speaker or amplifier system.
The level of this output is controlled by the MASTER
knob on the top panel.
3. LINE INPUTS (RCA) Connect line-level devices, such
as CD players, samplers or audio interfaces, to these
inputs.
4. PHONO INPUTS (RCA) – Connect phono-level devices, such as turntables, to these inputs.
5. GROUNDING TERMINAL – If you are using phono-level turntables with a grounding wire, connect the grounding wire to
these terminals. If you experience a low “hum” or “buzz”, this could mean that your turntables are not grounded.
Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be
connected to the grounding terminal.
TOP PANEL FEATURES
1. POWER LED – Illuminates when the mixer is on.
2. MASTER – This control adjusts the output volume of the
Program mix.
3. MIC GAIN – Adjusts the audio level of the microphone
signal.
4. CUE GAIN – Adjusts the level of the headphone audio.
5. CUE SLIDER – Slide this to mix between Channels 1
and 2 in the headphones. When all the way to the left,
only Channel 1 will be heard. When all the way right,
only Channel 2 will be heard.
6. CHANNEL GAIN – Adjusts the corresponding channel’s
pre-fader and pre-EQ gain level.
7. CHANNEL TREBLE – Adjusts the high (treble)
frequencies of the audio on the corresponding channel.
8. CHANNEL BASS – Adjusts the low (bass) frequencies
of the audio on the corresponding channel.
9. INPUT SELECTOR – Selects the input source to be
routed to the corresponding channel. Input jacks are
located on the rear panel.
10. CHANNEL FADER – Adjusts the audio level on the
corresponding channel.
11. CROSSFADER – Blends audio playing between
Channels 1 and 2. Sliding this to the left plays channel
1 and sliding to the right plays Channel 2.
Note: The crossfader is user-replaceable if it should
ever wear out. Simply remove the facepanel, then
remove the screws holding it in position. Replace the
fader with a quality authorized replacement from your
local Numark retailer only.
12. MIC INPUT – Connect ¼” microphones to this input.
The microphone controls are located on the top panel.
13. HEADPHONES – Connect your ¼” headphones to this
output for cueing and mix monitoring.
14. DOCK * – Connect your iPod here. Gently rock the
iPod back and forth over the connector when attaching
or removing it.
15. DOCK ADJUSTER – Turn this knob accordingly so
your docked iPod rests against the support.
1
234
55
34
1
2
34
5
6
99
1010
11
12 13
14
15
7
8
6
7
8
* To record the Program mix to an iPod:
1. Connect the iPod to the DOCK.
2. In the iPod, go to Extras Voice Memos and select
Record Now.
3. When you are finished recording, stop and save it.
Note: You cannot play a track from the iPod and record to
it at the same time.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Numark Im1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Numark Im1 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info