624809
21
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
EN 21
Check if all materials have been supplied.
3. Cut-away for surface mounting and flush mounting
The cooking plate can be mounted both through surface mounting and flush mounting with respect to the table
top.
Conditions for the cut-away:
Table tops are to be made from heat-resistant materials (100°C).
The materials of the table top can expand when they come into contact with water. Veneer the cut-away or
coat it with a special type of glue for protection.
Observe the instructions of the table top manufacturer.
a. Surface mounting
Make a cut-away in the table top in accordance with the drawing 3a.
b. Flush mounting
Make a cut-away and a milling edge in the table top in accordance with the drawing 3b.
4. Install the insulation strip
Stick the insulation strip 2 mm from the outer edge at the rear side of the glass plate.
5. Install a bend for the exhaust duct
If the exhaust duct is mounted directly with a downward bend, first place the supplied bend on the unit. The
connection for the exhaust duct is on the rear of the unit. Make the connection airtight with aluminium tape.
6. Install the unit
Place the unit in the opening provided. Firmly hold the cooking plate on the left and the right sides. Slightly tilt it
and place the rear side into the openings. Then carefully lower the front side.
The duct can now be connected. For this follow the description in chapter 3.
3. INSTALL THE EXHAUST DUCT
3.1 Recirculation
In cases that do now allow for an exhaust duct to the outside, recirculation offers a solution. For this Novy offers an
exhaust box with Monoblock recirculation filter. The exhaust box is the ideal solution for making the unit suitable for
recirculation (drawing 7).
EXHAUST BOX
The exhaust box is connected to the exhaust dust coming from the unit. The Monoblock recirculation filter is installed
in the exhaust box. A choice can be made from the following exhaust box models (incl. Monoblock recirculation filter):
TYP MODEL DIMENSIONS (HxWxD) (mm) Duct connection
7910400 Plinth exhaust box with Inox/SS grate 98 x 818 x 290 220 x 90
7900400 Plinth exhaust box with Inox/SS grate 140 x 820 x 292 220 x 90
3.2 Exhaust duct to the outside
The motor outlet has a rectangular exhaust of 220 x 90 mm. It is recommended to connect an exhaust duct to this with
the same dimensions (drawing 8).
For optimum performance of the hood it is important to pay attention to the items mentioned below.
When using a flat exhaust duct:
Use flat ducts with rounded corners and air conductors in the bends. These ducts are to be obtained through Novy.
An adapter makes it possible to change from a flat to a round exhaust duct.
When using a round exhaust duct:
Use smooth, non-flammable pipes with an internal diameter that is equal to the external diameter of the connection
nozzle of the hood. Maximally extend flexible ducts and cut them to size.
Do not reduce the exhaust diameter. This will decrease the capacity and increase the noise level.
When connecting to a short exhaust duct, it may be required to mount a non-return valve to prevent the wind from
blowing in.
Use a hose clamp or aluminium tape for airtight connections.
In case of an exhaust pipe through the outside wall, use the outside wall grate.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Novy-1811-ONE

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Novy 1811 ONE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Novy 1811 ONE in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Novy 1811 ONE

Novy 1811 ONE Gebruiksaanwijzing - Nederlands, Deutsch, English, Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info