741773
22
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
EN 22
3.2 Exhaust duct to the outside
The motor outlet has a rectangular exhaust of 220 x 90 mm. It is recommended to connect an exhaust duct to this with
the same dimensions (drawing 8).
For optimum performance of the hood it is important to pay attention to the items mentioned below.
When using a flat exhaust duct:
Use flat ducts with rounded corners and air conductors in the bends. These ducts are to be obtained through Novy.
An adapter makes it possible to change from a flat to a round exhaust duct.
When using a round exhaust duct:
Use smooth, non-flammable pipes with an internal diameter that is equal to the external diameter of the connection
nozzle of the hood. Maximally extend flexible ducts and cut them to size.
Do not reduce the exhaust diameter. This will decrease the capacity and increase the noise level.
When connecting to a short exhaust duct, it may be required to mount a non-return valve to prevent the wind from
blowing in.
Use a hose clamp or aluminium tape for airtight connections.
In case of an exhaust pipe through the outside wall, use the outside wall grate.
General:
Make the duct as short as possible and with as few as possible bends to the outside.
Avoid square bends. Use rounded bends for proper air conduction.
If an exhaust pipe through the outside wall passes a cavity wall, make sure that the exhaust duct fully bridges the
cavity and slightly declines to the outside.
In case of an exhaust pipe through the roof, use a double-walled roof passage with sufficient width.
Never connect the exhaust to a flue duct.
Make sure that sufficient air is supplied. Fresh air can be supplied by slightly opening a window or an outside door or
by installing an inlet grate.
The unit is by default set to recirculation. Disable the recirculation program in case of exhaust to the outside (5.2).
4. ELECTRICAL CONNECTION
The installation and connection to the electricity grid shall only be carried out by an expert (electrician) who is
familiar with the required standards.
The junction box is to be found at the bottom of the cooking plate. Use a screwdriver to open the cover and place this in
the 2 grooves before the arrows.
Disable the main switch of the fuse concerned before connecting the unit.
Connect the unit in accordance with the table and diagram below.
Mains Connection Supply cord Circuit braker Wiring diagram
230V 50/60Hz 1 phase + N 3 x 6 mm² 32 A
230V 50/60Hz 3 phases 4 x 6 mm² 20 A
400V 50/60 Hz 2 phases + N 4 x 4 mm² 16 A
400V 50/60 Hz 3 phases + N 5 x 4 mm² 16 A
Attention! Properly put through the wires and tighten the screws.
We will not accept any responsibility for accidents resulting from a poor or wrong connection or accidents that may occur
with units without or with a defective earthing.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Novy 1801 One Power bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Novy 1801 One Power in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Novy 1801 One Power

Novy 1801 One Power Gebruiksaanwijzing - Nederlands, Deutsch, English, Français - 74 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info