11
Copyright © 2010 Nokia. All rights reserved.
To answer a call on one connected
device and put the active call on
hold on the other device, press and
hold the multifunction key for about
2 seconds.
To end the active call on one
connected device and make the call
on hold active on the other device,
press the multifunction key.
To switch between the active call on
one device and the call on hold on
the other device, press and hold the
multifunction key for about 2
seconds.
Activate or deactivate voice
prompts
Make sure the headset is switched
off and not placed in the clip or car
cradle. Press and hold the
multifunction key for about 5
seconds, and press and hold the
multifunction key again for about 2
seconds.
When you activate the prompts, the
green indicator light flashes once.
When you deactivate the prompts,
the yellow light flashes once. In
both cases, there is also an audible
notification.
Clear pairings
To clear the pairings from the
headset, switch off the headset, and
press and hold the multifunction
key for about 8 seconds. The headset
beeps twice, the red and green
indicator lights alternate, and the
headset enters pairing mode.
Troubleshooting
If you cannot connect the headset
to your compatible device, make
sure the headset is charged,
switched on, and paired with the
device.
