837052
3
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
STEP 3: RINSE YOUR MACHINE
AUTOMATIC RINSING IN DAILY USE
STARTUP & SHUTDOWN
During regular use, the machine
will automatically perform a rinse
at startup and shutdown to prime
or clear the system. This process is
indicated by the WHITE rinse icon.
This ensures the machine is clean, preheated, and running properly in the following scenarios.
After setting your water hardness, run a rinse cycle to thoroughly clean and prime the system with
fresh water. Water will flow directly into the drip tray. This will take about 30 seconds.
1
After water hardness is confirmed, the rinse icon will illuminate orange.
2
Press START to begin the rinse. The machine will beep to signal the rinsehas started.
Water will rinse from the coee spouts. You can also place a cup under the spouts to
collect the rinse water.
After 1 minute, you will see 0–5 purple squares
appear. This will indicate the water hardness
level of your water (0 purple squares = level 0,
5 purple squares = level 5, etc.).
All water has minerals that can build up in the machine over time. These minerals are referred
to as water hardness and can impact how often you need to descale your machine.
Locate the test strip in the accessories box.
Fully submerge it for 5–10 seconds in the water
you plan to use with your machine, ensuring all
squares are completely underwater.
5–10
SECONDS
Remove from water and place on a flat surface.
Wait 1 minute and check results.
Press the up and down arrows to set your
water hardness, matching the number of
purple squares (0–5) shown on your test strip.
Press START to confirm.*
*IF YOU NEED TO SET YOUR WATER HARDNESS LEVEL
AGAIN, SEE OWNER’S GUIDE.
Plug in machine and press POWER. The control
panel will display a water hardness of HD5.
hd 0 hd 01 hd 02 hd 03 hd 04 hd 05
Very
Soft
Very
Hard
STEP 3: TEST WATER HARDNESS
1
MINUTE
STEP 2: TEST WATER HARDNESS
YOU ARE NOW READY TO MAKE YOUR FIRST BREW
For your first time brewing with whole beans,
you will need to calibrate the grinder.
This will help you get the best-tasting espresso.
To calibrate the grinder, run a GRIND iQ cycle.
This easy 3-step process will take about 5 minutes.
CALIBRATING
THE MACHINE
The GRIND iQ LED will illuminate during daily use to show the status of GRIND iQ.
GRIND IQ LED COLOR KEY
OFF: The grinder
is calibrated.
YELLOW: GRIND iQ
cycle is required to
calibrate the grinder.
NOTE: You only need to run a GRIND iQ cycle on first
use, when switching beans in the same hopper, or ifthe
machine needs re-calibrating.
NOTE: When brewing a cold-brew or cold-pressed
drink immediately after a hot drink, the machine will
perform an internal rinse to cool the brew chamber.
The brew will start automatically once the rinse is
complete.
Place a 400 ml. or greater cup under the spouts.
When finished, the machine will beep again. Discard the
brewed espresso. You are now ready to brew.
1
3
Press GRIND IQ, then press START to begin the cycle.
The machine will beep to signal the cycle has started. The
calibration cycle will grind and brew up to 3 times in a row.
2
NOTE: A GRIND iQ cycle will grind and brew up to
54 g of beans to ensure optimal output.
STEP 4: GRIND IQ CYCLE
Skip this step if you're
using pre-ground coee.
Rinse
Rinse
4 5
ENGLISH
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ninja AutoBarista AE1001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ninja AutoBarista AE1001 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 13,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info