315566
25
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
25
Fault finding
the motor will not start
a fuse may have blown and needs replacing.
the cable may be defective and needs checking.
the suction power is reduced
the dust bag may be full and needs replacing.
See point 3.
the dust filters may be clogged and need replacing.
See point 3-4-7.
the hose, tube or nozzle may be blocked and needs to be
cleared.
the vacuum cleaner stops
the thermal cut-out has switched off the motor as a result of an
obstruction of the hose, tube or nozzle.
Remove the cause of the obstruction.
Maintenance
Always keep the cleaner in a dry place. The cleaner is designed for
continuous heavy work. Depending on the number of running hours
- the dust filters should be renewed.
Keep the container clean with a dry cloth, and a small amount of
spray polish.
For details of after sales service contact Nilfisk-Advance directly.
4. Changing the HEPA filter
Replacing the HEPA exhaust filter. In models with HEPA filter
placed under the handle cover:
1. Push the button inside the handle upwards and twist the handle
counter-clockwise and remove it.
2. Remove the HEPA filter.
3. Replace with the new HEPA filter and position it as shown.
4. Locate the handle into position and lock it by turning it
clockwise until it snaps.
All models
Damage resulting from the use of filters other than original Nilfisk
filters is not covered by the guarantee.
5. Suction power regulation
1. The suction power of the nozzle can be regulated by the slide
valve on the curved tube.
Suction is most powerful when the valve is pushed forward to
close the inlet.
2. For cleaning of e.g. Ioose covers and curtains, the suction power
can be reduced by sliding the valve backwards.
Models with two speed regulation
Suction is variable by changing the speed. See point 1.
6. Parking of the tube with nozzle
During and after cleaning you can park the hose with tube and
nozzle.
1. Press the parking clip on the nozzle inside the groove on the
back-side of the container
7. Main filter cleaning
The main filter can be cleaned with a dust bag in place, when the
suction efficiency is falling.
1. Open the container by pushing the knob on the lock.
2. Press the plastic flap inside the groove for the lock to release the
upper container from the main filter and remove the upper
container.
3. Remove the main filter from the bottom housing.
4. Replace the upper housing on the bottom housing with a dust
bag in place.
5. Start the vacuum cleaner.
6. Clean the filter material with the vacuum cleaner
7. Replace the cleaned main filter
8. Replace the upper container on top of the main filter
9. Lock the plastic flap on the upper container on the main filter
frame.
10. Close the lock.
Thermal cut-out protection
The vacuum cleaner is equipped with a thermal cut-out to protect
the motor and other vital machine parts from overheating. Should
the machine cut out, you will have to wait at least 5-10 minutes for
it to automatically reset. While you are waiting, switch the machine
off and unplug it, then check the hose, dust bag and filters to be sure
that nothing is blocking the flow of air through the machine.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nilfisk family bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nilfisk family in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info