319098
8
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
8
Extreme
DE
FR
ES
PT
I
T
NL
SV
NO
DA
FI
EN
Changing the active carbon lter
The active carbon lter removes bad
smell from the exhaust air. Change the
active carbon lter 1-2 times a year.
The active carbon lter is located
behind the dust bag and pre lter.
Always use original dust bags and
lters.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard ap.
4. Remove the dust bag.
5. Take out the lter holder.
6. Remove the old active carbon lter.
7. Fit the new active carbon lter.
8. Insert the lter holder on the pin
and push in place.
9. Insert the dust bag. If the dust bag
is closed push the cardboard ap
down to open it. Check that the
dust bag is correctly tted.
10. Close the lid.
11. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
Changing the HEPA lter
The HEPA lter cleans the exhaust
air from micro particles the dust bag
can not keep. The HEPA lter can
not be brushed or washed clean. The
X150, X200, X210, X250 and X300
models have an HEPA lter indicator
that shows when to change the HEPA
lter. Always use original dust bags
and lters.
1. Open the lid on the machine under-
side with a coin or a screw driver.
2. Take out the HEPA lter.
3. Insert the new HEPA lter. Check
that the HEPA lter is correctly
tted.
4. Put the lid back and close it with a
coin or a screw driver.
4
Adjust the suction power
Models with a sliding valve on the
hose handle - Eco, X100, X110,
X150, X200 and X210
The suction power is maximal with
the sliding
valve closed
and minimal
when all open.
Adjust the
suction power
by putting the
sliding valve
in the desired
position.
Models with three step adjustment
- X150, X200 and X210
The suction power
is adjusted with
the sliding valve
and also with the
touch control on
the machine.
Models with ve step adjustment
remote control - X250, X300
The suction power
is adjusted on the
remote control on
the hose handle.
Hose handle with
remote control
battery replacement,
battery type CR2032
1. Carefully remove the remote control
unit with a small, at tool.
2. Remove the old
battery - replace
with new type
CR2032.
3. Carefully reas-
semble the con-
trol unit back to
the hose handle
by pushing it in
place at handle.
5
5b
Eco, X100, X110,
X150, X200, X210
X250, X300
X150, X200, X210
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nilfisk extremex100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nilfisk extremex100 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info