586824
15
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
47
All work involving the 240 volt mains electricity
supply must be carried out by a quali ed electrical
contractor with full knowledge of the relevant safety
regulations.
The vacuum cleaner will not start
Thermal protector
The vacuum cleaner has a thermal cut-out that trips if the
vacuum cleaner becomes overheated.
Supreme 100 / Supreme 150 / Performer 150 /
Supreme 250 / Performer 250
If this happens - unplug the main power cord to reset the
vacuum cleaner. Wait 5-10 minutes to allow the machine to
cool down. While you are waiting, check the hose, dust bag
and lter to be sure that nothing is blocking the ow of air
through the machine. The vacuum cleaner should now start
again. If the cut-out trips again, you need to get a service
rm to remedy the fault.
Supreme LCD
When the overheat symbol in the display on the cleaner is
activated (models with display) the cleaners’ thermal cut-out
has tripped. For more information regarding thermal cut out,
see Overheat indicator.
Other troubleshootings
Are you using the correct hose?
Only the original hoses t correctly.
Does the vacuum cleaner start when you try a different
vacuum socket? If so, there is a fault in the electrical con-
nection to the rst socket. Unscrew the socket and check
the connection at the back.
Is the power supply connected to the vacuum unit?
Is there power at the socket?
Is the low-voltage lead connected to the vacuum unit?
The batteries to the radio remote control (wireless version
of vacuum cleaner) may have been discharged. Replace
the batteries with new ones, type 1.5V AAA.
The vacuum cleaner will not stop
Has a metal object become lodged in one of the vacuum
sockets causing the pins to become fused?
Poor suction power
Are all the vacuum sockets closed properly?
Has something become jammed in one of the vacuum
sockets?
Is the container lid closed properly?
Is the gasket between the container and the lid in place?
Is it damaged?
Is the pipe system blocked?
Is the dust bag full or clogged?
• Is lter clogged?
Supreme LCD Display
The Supreme LCD model has a display giving information
about the machine, Fig. 21.
Speed level
When the start button is pushed or the hose is connected to
the wall socket, the display will turn on and show the speed
level.
10 Troubleshooting
Dust bag/bag lter indicator
When the dust bag/ lter symbol starts to ash during opera-
tion, the cleaner tells you that it is almost time to clean the
bag lter and replace the dustbag. When it is time to do so,
symbol will be lit continuously. The dust bag/ ler symbol will
be lightened after every 20 operation hours of the cleaner. If
the symbol is lit, do like this: Turn off the cleaner by the hose
handle (remote versions) or remove the suction hose from
the wall inlet or by pushing the on/off switch on the display.
Then check if the bag lter/dustbag is clogged. Replacement
is described in chapters 7.1, 7.2, 7.3 and 7.4.
Reduced air ow indicator - lit
The reduced air ow symbol on the display indicates that
the air ow through the vacuum cleaner is reduced. After 30
seconds of operation with reduced air ow, the vacuum motor
will be shot down in order to prevent damage to the motor. If
the reduced air ow symbol is lit and the motor has been shut
down, do like this: Check the bag lter and dust bag (see
chapters 7.1, 7.2, 7.3 and 7.4) to see if anything is blocking
the air ow. Remove the material causing the reduced air ow
symbol to indicate.
Service indicator
When the service symbol starts ashing, the motor will run
for one more hour before it stops/will not start. The purpose
of the service symbol is to inform you that it is time to order
service of the cleaner. When the symbol is continuously lit,
the run time counter in the cleaner has counted that the al-
lowed amount of run time has passed. You must now contact
an authorised service workshop and let them perform a ser-
vice of the cleaner and to reset the run time counter.
Overheat indicator - ashing
The overheat symbol indicates that the cleaner has become
overheated. The cleaner stops automatically. Unplug the
main power cored to reset the vacuum cleaner and wait 5-10
minutes to allow the machine to cool down. While you are
waiting, check the hose, dust bag and lter to be sure that
nothing is blocking the ow of air through the machine.
Signal indicator - ashing
When the symbol is ashing, the hose handle is out of range
and there is no connection to the cleaner. The cleaner will
automatically stop after 30 min. if the hose handle or the
cleaner has not been activated.
WARNING!
Blockages can occur if:
a) the tools and accessories are not used as di rect ed
at all times.
b) wet or damp carpets are vacuumed.
c) foreign objects are vacuumed up when the tools
are not af xed to the hose.
d) the wall sockets are not kept open until the system
motor stops completly
e) the lter and bags are not regularly cleaned and
replaced as per manufacturers in struc tions.
NB! Blockages are caused by misuse and are not cov-
ered by the guarantee or warranty.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nilfisk Supreme LCD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nilfisk Supreme LCD in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Nilfisk Supreme LCD

Nilfisk Supreme LCD Gebruiksaanwijzing - Deutsch - 27 pagina's

Nilfisk Supreme LCD Gebruiksaanwijzing - Français - 25 pagina's

Nilfisk Supreme LCD Gebruiksaanwijzing - Dansk, Svenska, Suomi - 89 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info