586823
9
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
41
5 Vacuum unit Supreme 150 / Performer 150 / Supreme 250 / Performer 250 /
Supreme LCD assembly instructions
5.1 Fitting the wall bracket
Plan the positioning of the wall bracket so that there is plenty
of space above and below the area where the vacuum unit is
to be located. Make sure there is a minimum of 200 mm free
space below the dust container.
Mark the positions for all four screw holes with a pen or simi-
lar. The diameter of the holes in the holder is 5 mm. Select
screws and, if necessary, wall plugs suitable for the type of
wall concerned. Drill the four screw holes.
Fit the wall bracket with the large opening pointing down-
wards, see Fig. 15. Then screw the holder rmly into place.
5.2 Locating the vacuum cleaner on
the wall bracket
To facilitate the procedure, rst remove the dust container.
Free the container by pulling both handles outwards. Then
remove the container from the machine.
To mount the vacuum
cleaner/motor chassis to the wall bracket - just lower the chassis
downwards so that the locking device of the bracket will pass
through the slot of the chassis
Fig. 16. Make sure the corre-
sponding bracket on the machine is held rmly in place by
the wall bracket.
When removing the motor chassis from the wall bracket - push
the locking device towards you so it will release the chassis and
then lift the chassis up from bracket.
5.3 Connecting the machine
The machine is connected with the exible suction hose in
the lower position and the exhaust pipe uppermost, Fig 17.
The exible hose is connected to the dust inlet at the con-
tainer of the cleaner.
Push the hose in to the inlet at the cleaner
until the hose locks. Press the button on the hose inlet down-
wards in order to remove the suction hose.
The exible suction
hose acts as an adapter connecting the vacuum unit with the
pipe system.
NB! These connections must not be glued in case the
unit is handed in for service.
Position the central vacuum cleaner so that the exhaust pipe
can be kept as short as possible, maximum. 5 metres. Take
the surroundings into consideration when positioning the
exhaust. For this reason, you should always t a muf er.
For additional information concerning the assembly and
installation of the pipe system and low-current lead, please
refer to the separate assembly instructions supplied with the
pipe package.
Push the hose in to the inlet at the cleaner until the hose locks.
Press the button on the hose inlet downwards in order to remove
the suction hose.
Exhaust
Inlet
Fig. 17
Fig. 15
Fig. 16
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nilfisk Performer 250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nilfisk Performer 250 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Nilfisk Performer 250

Nilfisk Performer 250 Gebruiksaanwijzing - Deutsch - 27 pagina's

Nilfisk Performer 250 Gebruiksaanwijzing - Français - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info