8488
3
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
Note: When HOLD is on, in order to save power, press / , the player will be powered off after it displays
the model number and .
VIII.CONNECTING TO A COMPUTER
1. Installation of driving program
Note:
A. Windows 98 base needs installation of driving program, while Windows 2000/ XP/ ME do not.
B. Disconnect the MP3 player to the computer before installation is completed.
C. Windows 2000 Service Pack 3.0 (in the installation CD) must be installed under Windows 2000.
a. Load the provided installation CD in to the driver compartment.
b. Double clicks on SETUP.EXE, pictures will be shown as follows:
Then clicks to Next->Yes->Next->Next->Finish according to the reminder.
Installation is finished.
2. Connecting to a computer
Connect your MP3 player to PC via USB cable, One click on
/ or under condition that MP3 player has been on
status, the window will appear indicating that new hardware has been found, then the system will automatically install
the drive program. After it, a mobile disk icon (see following) will be found in "My computer" with "PC----" on LCD
display.
3. Upload/ Download files
So long as the driving program has been properly installed, the MP3 player itself is a mobile disk after being connected
to a computer. Therefore the file transfer is operated in the same way as the ordinary disk.
Note: a. Don't unplug the MP3 player during the process of uploading or downloading files; otherwise, it may
cause dysfunction of the unit due to the damage to the software.For details, please see Trouble shooting.
b.When you want to unplug the MP3 player from the USB port of the computer, be noted to "PC-- --" on LCD.
If LCD is blinking with "USb-SA" or "Usb-rd", it indicates that data is being transferred. Unplug the MP3 player
when it displays "PC-- --".
Special notice: Normal uninstallation for USB device is required under Windows 2000 or Windows XP; otherwise
it may cause damage or data loss to the player.
Operating steps are as follow:
a.Double clicks on icon of "Unplug or Eject Hardware" on bottom right corner of the computer (note: under XP, it is
"delete hardware safely") as following:
7 8
9 10
b.Click Stop on the pop-up window. Refer to the following picture on the left.
c.Click OK on the pop-up window. Refer to the following picture on the right.
d.Click OK on the pop-up window. See the following window. You may then unplug the MP3 player from USB port
after the above steps.
4. Upgrade/ Renew Software
Better not upgrade the software unless the player works abnormally, i.e. not able to be powered
on.
A.Connect MP3 with computer.
B.Press
/ , or MP3 has already been in ON status, then a mobile disk icon will appear in "My Computer" , see
picture a:
C. Steps: Start>Program>SigmaTelMSCN Audio Player>SigmaTel MSCN Firemware Download, see the following
picture b.
a b
Then a window will pop out as picture c:
After the above windows close automatically, the window of upgrading software will pop out as picture d:
c d
Note: if you want to farmat data area of the flash while upgrading, you need to choose Format Data Area.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nikkei NMP-320 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nikkei NMP-320 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Nikkei NMP-320

Nikkei NMP-320 Gebruiksaanwijzing - Nederlands - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info