641176
50
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
50
Analog Audio Parameters
These parameters are only displayed if Audio Source in Basic Tab Audio Configuration is set
to Analog Audio. The parameters are:
Balanced Audio Level: This control is only displayed if the encoder is equipped with a
balanced audio rear I/O panel. It selects the nominal signal level, as follows:
o SMPTE: Nominal level according to SMPTE RP155, typically used in North
America.
o EBU: Nominal level according to EBU R68, typically used in Europe.
The EBU level is 6 dB higher than the SMPTE level.
Audio Gain L (dB), Audio Gain R (dB): These controls allow an independent gain
adjustment for the left/right audio channels, from -18.0 dB to +18.0 dB, in steps of 0.5 dB.
Audio Mute L, Audio Mute R: These controls allow muting of the left/right audio
channels.
A/V Sync Adjustment
This parameter can be used to provide a small amount of A/V sync adjustment, for cases where
the A/V sync in the input signal to the encoder is not correct. If, in the input signal, audio is
behind the video, you can use this parameter to compensate for up to 100 milliseconds. Note
that it is only available for MPEG-1 Layer II and AAC-LC encoding; it will not be displayed for
Dolby Passthrough.
Audio Delay (ms): Use this to compensate for up to 100 milliseconds of audio delay in
the input signal. This setting will advance the audio in relation to the video by the
amount configured.
PMT Information
The PMT Information section has the following parameters:
Audio Type: determines the audio type in the PMT audio descriptor. This setting has no
actual impact on how the audio is encoded; it only affects its description in the PMT.
The choices are:
o Undefined: no further information. This is the most common setting.
o Clean Effects: indicates that the audio has no language.
o Hearing Impaired: indicates that the audio is prepared for the hearing impaired.
o Visual Impaired Commentary: indicates that the audio is prepared for the
visually impaired viewer.
If the Audio Encoding setting in the Basic Tab Audio Configuration is set to Dolby
Passthrough, another parameter becomes available in the PMT Information section:
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Niagara B264 Standalone Encoder bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Niagara B264 Standalone Encoder in de taal/talen: Engels als bijlage per email.

De handleiding is 3,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Snelstart handleiding - English - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info