629274
33
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
© 2015 UTC Fire & Security Americas Corporation, Inc. All rights reserved. 33
operation. For security reasons it is recommended this option be disabled.
Option 5: Enable NTP Server Time Updates: The NX-595E will check its internal clock and
use the internet to compare it against GMT time. This is done every 15min and will update itself
if the variance is greater than 3 minutes.
Option 6: When enabled an installer will automatically have access to Feature Setup, Network
settings, Output settings and IP reporting via the NX-595E's web pages. Otherwise the NX-
595E will need to be in program mode to access these additional features. By default this is on.
Option 7: Enable DLX900 Server: Allows remote configuration using DLX900 software.
Disable to prevent DLX900 connections to the NX-595E. Enabled by default and for the first 5
minutes after power up. Note this option does not prevent DLX900 connections to the panel via
PSTN, disable this in panel programming if required.
Option 8: Enable Web Access: When enabled, email and IP reporting will function. If the Web
Access Passcode is set to a non-zero value, email and IP reporting will function.
Segment 2: Reserved
Location 20 - IP Gateway
The 4 segments in Location 20 are used to view or set the IP address of the network gateway. If
you have disabled DHCP, you must manually set the IP address of the NX-595E
In homes, the gateway is usually the Internet Service Provider (ISP) device that connects the
user to the internet, such as a DSL or cable modem.
In an enterprise system, the gateway is the node that routes the traffic from a workstation to
another network segment. The default gateway is commonly the node connecting the internal
networks and the outside network (Internet).
Segments 1 - 4
Location 21 - NX-595E IP Address
The 4 segments in Location 21 are used to view or set the IP address of the NX-595E.
Segments 1 - 4
Location 22 - Subnet Mask
The 4 segments in Location 22 are used to view or set the Subnet mask.
Segments 1 - 4
Location 23 - DNS Server 1
The 4 segments in Location 23 are used to view or set the networks DNS server address.
Segments 1 - 4
Location 24 - DNS Server 2
The 4 segments in Location 24 are used to view or set the networks DNS server address.
Segments 1 - 4
Location 25 - Reserved
Segments 1 - 4
Location 26 - Reserved
Segments 1 - 4
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NetworX NX-595E IP Communication Module bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NetworX NX-595E IP Communication Module in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info