608669
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
May 2008
Safety Warning: The socket-outlet shall be installed near the equipment and shall be easily accessible.
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2008 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is subject to
change without notice.
Console
Gaming
Set-top
Box
LEDs, Security Button, and Reset Button
To set the security on your Powerline adapters, see the XAV101 Powerline AV Ethernet
Adapter User Manual, located on your Resource CD, and also available at
http://www.NETGEAR.com/support
Warning: Do not press the Security button on the Powerline AV Ethernet Adapter until
installation is complete and the adapters are communicating with each other. Pressing this
button too soon can temporarily disable Powerline communication. If this should occur, press
the Reset button for 2 seconds to return the Powerline AV Ethernet Adapter to its factory
default settings.
LED Description
Power Solid. The electrical power is on.
Blinking. The adapter is in the process of resetting or security setup.
Off. There is no electrical power.
Powerline Solid. The adapter is connected to a Powerline network.
Blinking. The adapter is sending or receiving data.
Off. The adapter has not found any other compatible Powerline devices
using the same encryption key.
Green: Link rate > 80
Mbps
Orange: Link rate > 50
and < 80 Mbps
Red: Link rate < 50
Mbps
Ethernet Solid. The Ethernet port is linked, but there is no activity.
Blinking. There is traffic between an Ethernet port and the Powerline
network.
Off. There is no Ethernet connection.
Powerline LED
Ethernet LED
Power LED
Security
button
Reset
button
Ethernet port
Troubleshooting Tips
Technical Support
Thank you for selecting NETGEAR products. After completing installation, register your
product at http://www.NETGEAR.com/register.
Registration on the website or over the phone is required before you can use our telephone
support service. The phone numbers for worldwide regional customer support centers are on
the Warranty and Support Information card that came with your product.
Go to http://www.NETGEAR.com/support for product updates and Web support.
Power LED is off. Make sure that power is supplied to the electrical outlet, and that the
Powerline devices is not plugged into an extension cord, power strip,
or surge protector.
Powerline LED is
off.
Make sure that the Powerline devices are plugged into outlets with
power.
Move the Powerline device to a closer location.
If you have set network security, make sure that all Powerline
devices are using the same encryption key.
Reset the devices to factory default settings. Refer to the User
Manual for instructions.
Ethernet LED is
not blinking.
Make sure that your router and modem are on and working correctly.
Make sure that the Ethernet cables are working and securely
plugged into the devices.
Reset the devices to factory default settings. Refer to the User
Manual for instructions.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Netgear XAV101 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Netgear XAV101 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Netgear XAV101

Netgear XAV101 Gebruiksaanwijzing - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info