710462
144
Verklein
Vergroot
Pagina terug
1/155
Pagina verder
If the WAN PoE LED lights amber or green but the Activity LED is off, do the following:
1. Disconnect and reconnect the Ethernet cables and wait several minutes to see if the Activity LED lights
solid green or blinks green.
2. If you use a power adapter with the access point, disconnect and reconnect the power adapter and wait
several minutes to see if the Activity LED lights solid green or blinks green.
3. If the WAN PoE LED lights amber or green but the Activity LED is still off, you can use the Reset button
to return the access point to its factory default settings. For more information, see Use the Reset Button
on page 118.
If the error persists, a hardware problem might exist. For recovery instructions or help with a hardware
problem, contact technical support at netgear.com/support.
2.4G or 5G WLAN LED Is Off
If the 2.4G WLAN LED or 5G WLAN LED is off, do the following:
Check to see if a radio is disabled (see Turn a Radio On or Off on page 52). By default, both radios are
enabled and the WLAN LEDs light solid green or solid blue or blink blue.
If you are using a Power over Ethernet (PoE) connection, make sure that the PoE switch is providing
sufficient power to the access point. Insufficient PoE power can affect the radios. Also see Power LED
Is Alternating Green and Amber on page 143.
If the error persists, a hardware problem might exist. For recovery instructions or help with a hardware
problem, contact technical support at netgear.com/support.
WAN PoE LED or LAN LED Is Off While a Device Is Connected
When a network device such as a PoE switch, non-PoE switch, or Internet modem is connected to the WAN
PoE port of the access point, the WAN PoE LED lights amber or green, depending on the speed of the
connection. Similarly, when a network device such as a switch, hub, or computer is connected to the LAN
port of the access point, the LAN LED lights amber or green, depending on the speed of the connection.
If the WAN PoE LED or LAN LED remains off, a hardware connection problem might be occurring. Check
these items:
Make sure that the Ethernet cable connectors are securely plugged in at the access point and the
network device.
Make sure that the connected network device is actually turned on.
Make sure that you are using the correct Ethernet cable. Use a standard Category 5 Ethernet patch
cable. If the network device incorporates Auto Uplink (MDI/MDIX) ports, you can use either a crossover
cable or a normal patch cable.
Diagnostics and Troubleshooting
144
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
144

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Netgear WAC510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Netgear WAC510 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info