710751
224
Verklein
Vergroot
Pagina terug
1/302
Pagina verder
GS108T and GS110TP Smart Switch Software Administration Manual
5-56 Managing Device Security
v1.0, April 2010
Protocol Type. Requires a packet’s protocol to match the protocol listed here. Select a
type from the drop down menu or enter the protocol number in the available field.
Src IP Address. Requires a packet’s source IP address to match the address listed here.
Type an IP Address in the appropriate field using dotted-decimal notation. The address
you enter is compared to a packet's source IP Address.
Src IP Mask. Specifies the source IP address wildcard mask. Wild card masks determines
which bits are used and which bits are ignored. A wild card mask of 255.255.255.255
indicates that no bit is important. A wildcard of 0.0.0.0 indicates that all of the bits are
important. Wildcard masking for ACLs operates differently from a subnet mask. A
wildcard mask is in essence the inverse of a subnet mask. For example, to apply the rule to
all hosts in the 192.168.1.0/24 subnet, you type 0.0.0.255 in the Source IP Mask field. This
field is required when you configure a source IP address.
Src L4 Port. Requires a packet’s TCP/UDP source port to match the port listed here.
Click Complete one of the following fields:
Source L4 Keyword: Select the desired L4 keyword from a list of source ports on
which the rule can be based.
Source L4 Port Number: If the source L4 keyword is Other, enter a user-defined Port
ID by which packets are matched to the rule.
Dst IP Address. Requires a packet’s destination port IP address to match the address
listed here. Enter an IP Address in the appropriate field using dotted-decimal notation. The
address you enter is compared to a packet's destination IP Address.
Dst IP Mask. Specifies the destination IP address wildcard mask. Wild card masks
determines which bits are used and which bits are ignored. A wild card mask of
255.255.255.255 indicates that no bit is important. A wildcard of 0.0.0.0 indicates that all
of the bits are important. Wildcard masking for ACLs operates differently from a subnet
mask. A wildcard mask is in essence the inverse of a subnet mask. For example, to apply
the rule to all hosts in the 192.168.1.0/24 subnet, you type 0.0.0.255 in the Source IP Mask
field. This field is required when you configure a source IP address.
Dst L4 Port. Requires a packet’s TCP/UDP destination port to match the port listed here.
Complete one of the following fields:
Destination L4 Keyword: Select the desired L4 keyword from a list of destination
ports on which the rule can be based.
Destination L4 Port Number: If the destination L4 keyword is Other, enter a user-
defined Port ID by which packets are matched to the rule.
224

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Netgear GS108Tv2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Netgear GS108Tv2 in de taal/talen: Engels als bijlage per email.

De handleiding is 27,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Netgear GS108Tv2

Netgear GS108Tv2 Installatiehandleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info