646451
106
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
97NetBotz Appliance User’s Guide
Proxy
Use the Proxy icon to allow the appliance to use an HTTP, Socks V4, or V5 Proxy Server. When
configured, the appliance uses the proxy server for all e-mail and HTTP Post communications, allowing
these communications to cross the firewall. These settings apply only to communications from the
appliance.
To use an HTTP, Socks V4, or V5 Proxy Server, double-click the Proxy icon to open the Proxy Settings
window. This window contains an HTTP tab and a SOCKS tab, each of which contains the following
fields:
Enter your information and click OK to save your changes.
Rack Access Settings
The Rack Access Settings dialog allows you to set the Auto Lock Timeout and the HID format for the
proximity cards.
Auto Lock Timeout. The Auto Lock Timeout determines how long (in seconds) after a lock is
unlocked that the lock will automatically attempt to lock again. If after the timeout expires the door is
still open, or the handle is up, the lock command will continue to be issued until the proper locking
conditions are fulfilled (handle down and door closed). The auto-locking functionality will attempt to
relock the door after a card, a key, or a remote command is used to unlock the lock.
The Auto Lock setting is also used to limit the amount of time a Level One authorization card has to
authorize a Level Two card swipe. The Auto Lock Timeout setting has a minimum value of 10 seconds
(the default) and a maximum of 60 seconds.
Card Format. The Rack Access System uses HID proximity cards to control access. The HID cards
must be one of the following formats:
H10301 - Standard 26-bit
H10302 - 37-bit without a facility code
H10304 - 37-bit with a facility code
CORP1000 - Corporate 1000
The card format must be determined before any cards are entered into the system. If for some reason the
card format needs to be changed, all registered cards must be removed before the card format can be
changed.
A maximum of 200 cards is supported on NetBotz Rack Monitor 550/570 and Room Monitor 455 using
the Rack Access Pod 170.
Field Description
Hostname The host name or IP address of the proxy server the appliance uses for
e-mail, HTTP Posts, and other outbound communications.
Port The IP port number to connect to on the proxy server.
User name Enter a User name to allow access through the server.
Password/Verify password Enter a Password to allow access through the server.
106

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NetBotz NBRK0450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NetBotz NBRK0450 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info