Power cord and Power plug connection
1. Inset two cable connector in right direction
2. Tightly screw
3. Make sure two cable connect well
Note: The heater has a 45-degree tip over angle function. If the
heater tips over more than 45-degree angle, the heater will be
automatically shut off.
WARNING: Ensure that the supply cables are well mounted and
that it does not come in contact with the reflector of the heater
or that it does not trail into a heated area.
WARNING: Place on a flat, stable surface when used
In order to stabilize
the radiator, it is recommended to screw it to the base.
Switch instruction
O: Power ON/OFF
I: 50% power
II:100% Power
Caution:
When the appliance is not operated for a long period of time,
cleaning or maintenance is conducted or when the
location of the heater is changed, the heater should
be turned to OFF and unplugged from the electrical
connection.
Periodic inspection and removal of dirt and
contaminants will ensure that equipment can be operated
safely.
CLEANING AND MAINTANCE
Regular and careful cleaning helps your infrared heater operate
efficiently for many trouble free years. To clean your heater follow
steps below:
1. Unplug the power cord.
2. Make sure the heater is cool before continuing
3. To keep the heater clean, the outer shell maybe cleaned with a
soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, dry the unit with a soft cloth. (Caution: Do not let
liquids enter the heater)
4. Do not use alcohol, gasoline, abrasive powders, furniture polish
or rough brushes to clean the heater. This may cause damage
or deterioration to the surface of the heater.
5. Do not immerse the heater in water
6. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to
prevent dust and dirt build up. Use packaging carton to store.
Troubleshooting
1. Check if the power cord is plugged into an electrical outlet, if not,
plug in.
2. Check if electricity to the main fuse is working.
3. Check if the power switch is turned on.
ATTENTION:
1.Always disconnect the heater from the electricity supply and allow
it to cool before attempting to work on it.
2.If the heater has collected dust or dirt inside the unit or around the
heating element, have to unit cleaned by a qualified service agent.
Do not operate the heater in this condition.
3.The only maintenance required is cleaning of the external surfaces
of the heater.
4.Do not touch the heating element with bare fingers, as residue from
your hand could affect the life of the lamp. If it is accidentally touched,
remove the finger marks with a soft cloth moistened with mentholated
spirit or alcohol.
5.Do not attempt to repair or adjust any electrical or mechanical
functions on this heater.
6.The heater contains no user serviceable parts. Should the product
suffer damage or breakdown, it must be returned to the manufacturer
or its service agent.
7.Damaged supply cords to be replaced by the manufacturer, service
agent or similarly qualified person in order to avoid hazard.
RECYCLING
Electrical equipment must not be disposed of household waste and,
instead, should be utilized at appropriate facilities. Information on
utilization can be provided by the product vendor or the local
authorities. Waste electrical and electronic equipment contains
substances that are not neutral to the natural environment.
Equipment that is not recycled constitutes a potential hazard to the
environment and to human health.
DE ÜBERSETZUNG DER ORIGINALANLEITUNG
INFRAROTHEIZUNG
90-036
HINWEIS: BEVOR SIE DAS GERÄT ZUM ERSTEN MAL
VERWENDEN, LESEN SIE DIESE BEDIENUNGSANLEITUNG UND
BEWAHREN SIE SIE FÜR ZUKÜNFTIGE VERWEISE
AUF. MENSCHEN, DIE DIESE ANWEISUNG NICHT GELESEN
HABEN, DÜRFEN DAS GERÄT NICHT ZUSAMMENBAUEN,
LICHTEN, EINSTELLEN ODER BETRIEBEN
GENAUE SAFETY VORSCHRIFTEN
BEACHTUNG!
Lesen Sie sorgfältig durch - Die Infrarot-Heizung ist für einen sicheren
Betrieb ausgelegt. Trotzdem kann die Installation, Wartung und der
Betrieb des Heizgeräts gefährlich sein. Die Einhaltung der folgenden
Verfahren verringert das Risiko von Bränden, Stromschlägen und
Verletzungen von Personen und hält die Installationszeit auf
ein Minimum.
