726405
3
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
English
3
WIFIDS10xx
Wi-Fi smoke and heat detector
Description (g. A)
The smoke and heat detector is a device used to detect
smoke and heat. The device does not detect gas. The
device is suitable for indoor use only. If the device
detects smoke or heat, the alarm will sound and the LED
indicator will ash red continuously until it is eliminated.
1. Test button
2. LED indicator
3. Siren
4. Smoke intake
5. Mounting plate
Safety
Read the manual carefully before use. Keep the
manual for future reference.
Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
The device has a limited lifetime. Replace the device
10 years after the date of purchase. Write the
purchase date on the manual for future reference.
Battery safety
Use only the batteries mentioned in the manual.
Do not use old and new batteries together.
Do not use batteries of dierent types or brands.
Do not install batteries in reverse polarity.
Do not short-circuit or disassemble the batteries.
Do not expose the batteries to water.
Do not expose the batteries to re or excessive heat.
Batteries are prone to leakage when fully discharged.
To avoid damage to the product, remove the
batteries when leaving the product unattended for
longer periods of time.
If liquid from the batteries comes into contact with
skin or clothing, immediately rinse with fresh water.
Installation (g. B)
Warning!
Do not use the device outdoors.
Do not expose the device to water or moisture.
Install the device out of the reach of children.
Install at least one device at each oor level.
Preferably install one device in each recommended
area.
Do not install the device in bathrooms, toilets or
other rooms where the device can be triggered by
steam or condensation. Install the device at least 3
meters away from these rooms.
Do not install the device in rooms where normal
combustion occurs regularly.
Do not install the device in rooms with temperatures
below 5 °C or above 37 °C.
Do not install the device in dusty or dirty
environments.
Do not install the device near doors and windows.
Do not install the device near radiators or air vents in
walls or ceilings.
Do not install the device behind curtains or furniture.
Do not use rechargeable batteries in order to prevent
malfunctions.
Do not paint the device.
1. Download, install and launch the app “Nedis
SmartLife” from the Apple App Store or Google Play
Store on your mobile device.
2. Create a new account or log in to your existing
account.
3. Tap “+” to add the device.
4. Select the correct product from the list.
5. Place the batteries (2x AA, alkaline) into the battery
compartment.
6. Press the test button 3 times in 2 seconds.
7. When the LED is turned on, conrm in the app.
8. Conrm the Wi-Fi network and password.
9. Enter the device name.
10. Mount the device to the mounting plate. Refer to the
illustrations for the correct positioning of the device.
11. Test the alarm. Refer to the section Testing the
alarm”.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nedis WIFI DS10WT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nedis WIFI DS10WT in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info