726102
4
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
4
a
Quick start guide
Mobile air conditioner ACMB2WT9
For more information see the extended manual
online: ned.is/acmb2wt9
Intended use
The product is exclusively intended as a mobile air conditioner for
domestic, indoor use.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
Control panel
Swing louvers
Power cable storage
Manual drainage outlet
Continuous drainage outlet
Air outlet
Power cable
Exhaust hose
Exhaust nozzle

Exhaust hose connector

Window kit

Remote control

Window kit adjustment
screws

Exhaust nozzle screw
Safety instructions
-
WARNING
Thoroughly read all warnings.
This user manual is addressed to the end user. Read this
information carefully before installing or using the product.
Only use the product as described in this manual.
This product can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
Close supervision is necessary when the product is used by or
near children, animals or inrm persons. Do not allow children to
play with it or touch it.
Keep the product out of reach from children.
Do not use a damaged or defective product, but return it for
repair or replacement.
Do not expose the product to water, rain, moisture or high
humidity.
If the product is immersed in water, do not touch the product or
the water.
Shut o the main power grid and carefully remove the plug from
the power outlet.
After the product has been immersed or covered in water or
other liquids, do not use the product again.
Keep the product away from heat sources. Do not place the
product on hot surfaces or near open ames.
Do not use the product near explosive or ammable materials.
Do not insert any objects into the product.
Do not obstruct or cover the product’s air inlet or outlet grid.
Always disconnect the product from the power outlet when
cleaning or moving the product.
Do not pull the power cable to move the product.
This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
Disconnect the product from the power outlet and other
equipment if problems occur.
Turn o the main power switch before unplugging the power
cord.
Do not use the product when the cord or plug is damaged.
Make sure that the electrical supply in your area matches a
voltage of 220 – 240 VAC and a frequency of 50 Hz.
Connect to a grounded socket only.
If necessary, use an earthed extension cable of a suitable
diameter.
Fully extend the power cord and make sure the power cord does
not contact the product.
When using an extension cord, use one which is as short as
possible and fully extended.
Do not use external timers or remote control systems to switch
the product on or o.
Ensure people do not trip over the cord.
Make sure that the power cable cannot become entangled and
does not hang over the edge of a worktop.
Do not leave the product unattended when switched on.
R290 is a refrigerant gas that complies with the European
directives on the environment.
Be aware that refrigerants can be odorless.
Place the product in an area without any continuous sources of
ignition (for example: open ames, gas or electrical appliances in
operation).
Only install, operate and store the product in a room with a oor
area above 11 m
2
.
Only store the product in a well-ventilated area.
Store the product in such a way as to prevent mechanical failure.
When the product is installed, operated or stored in a
non-ventilated area, make sure the room is designed to prevent
the accumulation of refrigerant leaks resulting in a risk of re or
explosion due to ignition of the refrigerant caused by electric
heaters, stoves, or other sources of ignition.
Only persons with a current valid certicate from an
industry-accredited assessment authority, which authorizes their
competence to handle refrigerants safely in accordance with an
industry recognized assessment specication, can work on or
break into a refrigerant circuit.
Servicing can only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel can only be carried out
under the supervision of the person competent in the use of
ammable refrigerants.
When defrosting and cleaning the product, do not use any
means other than those recommended by the manufacturing
company.
Do not puncture or heat any part of the refrigerant circuit.
Installing the product
Place the product on a at, level surface.
-
Only move the product in an upright position.
-
Leave a minimum of 0.5 m space around the air inlet and outlet
to allow a good circulation of airow.
-
If the product has been tilted, allow it to stand upright for 2 hours
before plugging it in.
Assembling the exhaust
-
Do not block the exhaust hose, this may cause overheating.
-
Only use the provided exhaust hose.
See image B.
Assembling the continuous drainage (optional)
1. Open the continuous drainage outlet A
5
.
2. Connect A
5
to a water container or drainage system (not
included).
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nedis ACMB2WT9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nedis ACMB2WT9 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info