216007
149
Verklein
Vergroot
Pagina terug
1/151
Pagina verder
137
9. Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs
are needed also by referring to the
o Troubleshooting section on page 112 of your user’s
manual. This checklist below will help us solve your problem more efficiently.
Frequency of Occurrence always sometimes (How often?________) other (________)
Power
No power (POWER indicator does not light green) See
also “Status Indicator (STATUS)”.
Power cable's plug is fully inserted into the wall out-
let.
Main power switch is pressed to the ON position.
Lamp cover is installed correctly.
Lamp Hours Used (lamp operation hours) was
cleared after lamp replacement.
No power even though you press and hold the
POWER button for a minimum of 2 seconds.
Shut down during operation.
Power cable's plug is fully inserted into the wall out-
let.
Lamp cover is installed correctly.
Power Management is turned off (only models with
the Power Management function).
Off Timer is turned off (only models with the Off
Timer function).
Video and Audio
No image is displayed from your PC or video equipment
to the projector.
Still no image even though you connect the projec-
tor to the PC first, then start the PC.
Enabling your notebook PC’s signal output to the
projector.
• A combination of function keys will enable/disable
the external display. Usually, the combination of the
“Fn” key along with one of the 12 function keys
turns the external display on or off.
No image (blue background, logo, no display).
Still no image even though you press the AUTO
ADJUST button.
Still no image even though you carry out [Reset] in
the projector’s menu.
Signal cable's plug is fully inserted into the input
connector
A message appears on the screen.
( __________________________________ )
The source connected to the projector is active and
available.
Still no image even though you adjust the bright-
ness and/or the contrast.
Input source's resolution and frequency are
supported by the projector.
Image is too dark.
Remains unchanged even though you adjust the
brightness and/or the contrast.
Image is distorted.
Image appears to be trapezoidal (unchanged even
though you carry out the [Keystone] or [3D Reform]
adjustment).
Parts of the image are lost.
Still unchanged even though you press the AUTO
ADJUST button.
Still unchanged even though you carry out [Reset]
in the projector’s menu.
Image is shifted in the vertical or horizontal direction.
Horizontal and vertical positions are correctly ad-
justed on a computer signal.
Input source's resolution and frequency are sup-
ported by the projector.
Some pixels are lost.
Image is flickering.
Still unchanged even though you press the AUTO
ADJUST button.
Still unchanged even though you carry out [Reset]
in the projector’s menu.
Image shows flickering or color drift on a computer
signal.
Image appears blurry or out of focus.
Still unchanged even though you checked the sig-
nal’s resolution on PC and changed it to projector’s
native resolution.
Still unchanged even though you adjusted the fo-
cus.
No sound.
Audio cable is correctly connected to the audio in-
put of the projector.
Still unchanged even though you adjusted the vol-
ume level.
AUDIO OUT is connected to your audio equipment
(only models with the AUDIO OUT connector).
149

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nec np 4001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nec np 4001 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Nec np 4001

Nec np 4001 Gebruiksaanwijzing - Deutsch - 150 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info