512550
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8
DEPTH 2100 Installation and Operation Manual
NAVMAN
5 Installation
Instrument Installation
The instrument can be easily installed in different
types of instrument panels.
1. Select a suitable location for the instrument.
When selecting the location for mounting, the
following are recommended:
• Controls of the instrument must be
accessible to the user.
• Electrical connections must be routed to
the boat system as directly as possible,
minimising the length of cable where
practical.
• Location should provide as much protection
from the elements as possible.
• The panel for mounting the instrument
should be 3 mm to 19 mm (1/8 to 3/4 inch)
thick.
• The space behind the instrument panel
must have a depth of at least 95 mm (3.75
inches).
2. Drill a 51 mm (2-inch hole) on the instrument
panel in the selected location.
3. With the mounting bracket removed, insert the
instrument into the hole until the back of the face
plate is flush with the outside mounting wall.
4. Slide the bracket over the body of the
instrument. Note: Orient the bracket in such a
manner that it does not cover the buzzer.
5. Tighten the mounting nut until the bracket is
secure.
6. Connect the power cord at the back of the
instrument to a 12 V power supply which is
active whenever the ignition switch is on.
The red lead should be connected to the
positive terminal of the power supply via
a 1 amp fuse or a 1 amp circuit breaker.
• Red (+) Terminal
• Black (-) Terminal
• Orange External Buzzer
Use for optional external buzzer (use red (+)
terminal to complete circuit). If unused then
tape to avoid shorting.
• Brown Data input/output
Your Depth 2100 can be used as a repeater for
another DPT or DBT NEMA depth sounder. If
unused then tape to avoid shorting.
IMPORTANT: If unsure about wiring contact
your nearest NAVMAN dealer.
Bracket
Buzzer
RCA Jack
Connector
600 mm (24 inch)
Power Cord
Black (-)
Red (+)
Orange
Brown
6 Wiring
The black lead should be connected to the
negative terminal.
7. Obtain the power from a 12 V source as
directly as possible. Avoid power circuits which
share loads with ignition, alternators, radio
transmitters, etc. Excessive electrical noise
associated with such devices may prevent the
instrument from operating properly.
8. Connect the RCA phono plug on the
transducer cable to the instrument. Extension
cables are available from your NAVMAN dealer
if the transducer cable is too short.
Instrument Panel
Mounting
Bracket
51 mm (2 inch) Hole
Instrument
Sealing Gasket
2.5"
63.5 mm
.75"
19.0 mm
3.75"
95 mm
Mounting Nut
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Navman Depth 2100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Navman Depth 2100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Navman Depth 2100

Navman Depth 2100 Gebruiksaanwijzing - Nederlands - 10 pagina's

Navman Depth 2100 Gebruiksaanwijzing - Deutsch - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info