707117
145
Verklein
Vergroot
Pagina terug
1/147
Pagina verder
Display menu: Lets you select one of two ways to display the current state of the Modulation
Strip: Bar or Dot. Bar displays a bar of lit LEDs from the default position of the strip to the cur-
rent value; whereas Dot displays a dot of lit LEDs at the current value.
Touch Ctl menu: Lets you select between Absolute (default behaviour) and Relative. When us-
ing Relative, the current value of the controlled parameter is preserved when you put your fin-
ger anywhere on the Modulation Strip. You can then move your finger up and down to change
the parameter by the corresponding amount.
Spring Mode
This mode simulates a simple spring that can be deflected both up and down from its default posi-
tion, which is the middle of the Modulation Strip. The current position of the spring (the parameter
value) is indicated by a blue LED. If you put your finger on the strip, the value instantly jumps to
the corresponding position and stays there as long as you keep your finger on the strip. When you
remove your finger, the value springs back to its default position. This behavior is called Absolute
(alternatively, Standard can be set to Relative, see below). This mode mimics the behavior of the
Pitch Strip. In Spring mode, the following additional settings are available for the Modulation Strip:
Display menu: Lets you select one of two ways to display the current state of the Modulation
Strip: Bar or Dot. Bar displays a bar of lit LEDs from the default position of the strip to the cur-
rent value; whereas Dot displays a dot of lit LEDs at the current value.
Strength slider: Adjusts the rate at which the spring rebounds to its default position. The higher
the Strength setting, the quicker the value will spring back to its default position.
Touch Ctl menu: Lets you select between Absolute (default behaviour) and Relative. When us-
ing Relative, the current value of the controlled parameter is preserved when you put your fin-
ger anywhere on the Modulation Strip. You can then move your finger up and down to change
the parameter by the corresponding amount.
Ball Mode
This mode simulates a ball that is attracted by the gravity of your finger. The current position of the
ball (the parameter value) is indicated by a blue LED. If you put your finger on the strip, the ball will
move towards your finger and stop as it reaches the finger’s position. If you remove your finger
before, the ball sustains its momentum and continues to move along the Modulation Strip until the
friction of the surface causes it to slow down and stop. Alternatively, you can “throw” the ball by
putting your finger on the ball’s current position, dragging it in any direction, and removing your
finger. The faster you drag your finger, the faster the ball will get. In Ball mode, the following addi-
tional settings are available for the Modulation Strip:
Display menu: Lets you select one of two ways to display the current state of the Modulation
Strip: Bar or Dot. Bar displays a bar of lit LEDs from the default position of the strip to the cur-
rent value; whereas Dot displays a dot of lit LEDs at the current value.
Friction slider: Adjusts the friction of the surface that slows down the ball once you have re-
moved your finger. The higher the Friction value, the quicker the ball will decelerate and stop.
When fully left, the ball never stops. When fully right, the ball stops instantly.
Gravity slider: Adjusts the attraction of your finger on the ball: The higher the Gravity value,
the faster the ball will move. This parameter doesn’t affect the ball movement if you throw the
ball with your finger (see above).
Configuring Touch Strips
139
145

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Native Komplete Kontrol S25 MK1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Native Komplete Kontrol S25 MK1 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Native Komplete Kontrol S25 MK1

Native Komplete Kontrol S25 MK1 Gebruiksaanwijzing - Deutsch - 218 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info