Handleiding NRX EVO 500EH (pagina 3 van 11) (Engels)

520224

Verklein

Vergroot

Pagina terug

1/11

Pagina verder

1. INSTALLATION

1.1 Telephone Connection

•

other end to the socket located in the bottom of the phone.

Replace the handset to the cradle.

NOTE: You will need to remove the wall mount

bracket to access this socket.

•Connect the small plug (RJ-11) of the telephone line

cord to the socket at the back of the unit and the other plug

to the telephone socket at the wall.

NOTE: If the RJ-11 to RJ-11 line cord is used, please

ensure that the Blue plug is connected to the wall socket.

• Connect the AC adaptor into a standard 220-240VAC

mains socket and the power socket at the back of the NRX

EVO 500EH.

• The display will show 00-00-00. After about 4 seconds

the display will show TOTAL:00 NEW:00

• If you have subscribed to a Caller ID Service, the time

Connect one end of the coil cord to the handset and the

Installation & Telephone Set-Up

and date will be automatically updated when the first

call is received. Otherwise, it is necessary to set the time

and date manually, please refer to the Telephone Setup

Menu.

•

In case of power failure or accidental unplugging of the

AC adaptor, the built-in EEPROM will retain all the

telephone's memory including phone book and CID

records.

1.2 Connecting A Wireless Headset

The NRX EVO 500EH has an electronic hookswitch

interface, located at the rear of the telephone. This

allows wireless headset products from Plantronics, GN

Netcom (Jabra) and Sennheiser to be connected to the

telephone and control the line without the need for a

handset lifter product.

· Plantronics

Using the Plantronic cable supplied with the NRX EVO

500EH, plug the round plug into the 'Handset Lifter'

port located at the bottom of your Plantronics headset

base and the RJ45 plug into the 'E.H.S' port on the back

of the telephone.

Telephone Set-Up

Connect the 'Telephone Cable Port' on the headset base

to one of the headset ports located on the left side of the

telephone using the cable provided with your headset

product.

For operation of your Plantronics headset, please refer

to the user guide that was supplied with the product.

The NRX EVO 500EH replicates the operation of the

handset lifter allowing control of a phone call by the

'Call Control Button' located on the headset.

You can also control the headset with the

'Speaker/Headset' button on the telephone. i.e If you

have answered an incoming call using the 'Call Control

Button' on the headset, you can press the

'Speaker/Headset' button on the telephone to end the

call and turn off the headset.

· GN Netcom (Jabra)

Using the GN cable supplied with the NRX EVO

500EH, plug the end with a white band close to the

plastic plug into the 'RHL/AUX' port located at the

bottom of your GN headset base and other end plugs

into the 'E.H.S' port on the back of the telephone.

Connect the 'Telephone Port' on the headset base to one

of the headset ports located on the left side of the

telephone using the cable provided with your headset

product.

NOTE: If your GN headset model has multiple

hookswitch modes, please ensure the base is set to 'GN

RHL' - Refer to the user guide supplied with your headset.

The NRX EVO 500EH replicates the operation of the

handset lifter allowing control of a phone call by the 'Talk

Button' located on the headset. Once the line has been

seized by the headset, the 'Speaker/Headset' button on the

telephone is disabled until the call is completed by

pressing the 'Talk Button' on the headset again.

· Sennheiser

To connect a Sennheiser wireless headset to the NRX

EVO 500EH, the Sennheiser TCI-01 connection box is

required.

Connect the TCI-01 to the Sennheiser headset base with

the cable supplied using the DW Com port, then connect

to the telephone using the GN cable supplied with the

phone. The end with a white band close to the plastic plug

connects to the 'HL1 port' on the TCI-01 and other end

plugs into the 'E.H.S' port on the back of the telephone.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

NRX EVO 500EH Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info