745038
6
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
ENGLISH
1 IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or IR output of another compatible device to
allow control of the M10 from a remote location.
To program IR Remote commands into your M10 via IR IN, go
to theSettings menu of the BluOS App,selectPlayer and
then IR remote.Simply select the function desired from theIR
Remotemenu, point an IR remote control at the IR repeater and
press the button to perform that function. Once successful, a
check-mark will appear beside the programmed function. You
can now use the IR remote control to command the M10 with the
programmed functions.
2 +12V TRIGGER OUT
The +12V TRIGGER OUT is used for controlling external equipment
equipped with a +12V trigger input.
Connect this +12V TRIGGER OUT to the other equipment’s
corresponding +12V DC input jack using a mono cable with 3.5mm
male plug.
This output will be 12V when the M10 is ON and 0V when it is either
OFF or in standby mode.
3 ANALOG IN 1-2
Input for line level sources such as CD player, tuner or any
compatible devices. Use dual RCA-to-RCA cable to connect the
source devices left and right Audio Output to these line input
ports.
The sources will appear as Analog Input 1” and Analog Input 2” in
the navigation drawer of the BluOS App.
4 PRE OUT
Use dual RCA-to-RCA cable to connect PRE-OUT to the
corresponding analog audio input of compatible devices such
as ampliers, receivers or other applicable devices. This makes it
possible to use the M10 as a pre-amplier to such devices.
5 SUBW (SUBWOOFER) 1, 2
Connect SUBW 1 and/or 2 to the low level input of corresponding
powered subwoofer.
Low frequency information below the selected crossover setting is
sent to the connected subwoofer.
6 OPTICAL IN/COAXIAL IN
Connect to corresponding optical and coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
7 HDMI ARC
Connect to TV that supports HDMI Control (CEC) and Audio Return
Channel (ARC) functions. Both functions are possible if external
devices that also support both features are interconnected with
M10 via HDMI connection.
Use HDMI cable to connect HDMI ARC to corresponding HDMI ARC
port of TV.
With ARC connection established, M10 will output audio signal
from TV.
IMPORTANT
Ensure that the audio setting/format of ARC-connected devices to M10
is set to PCM only.
Only audio output signal from TV is supported by HDMI ARC port. There
is no video output at HDMI ARC port of M10.
8 SERVICE
These USB port and tact switch are for servicing purposes only. Not
for consumer use.
IDENTIFICATION OF CONTROLS
REAR VIEW
6
4 5 6 9 8 107 8
11 12 13
21 3
ATTENTION!
Please ensure that the M10 is powered o or unplugged from the mains power outlet before making any connections. It is also advisable to power down or
unplug all associated components while making or breaking any signal or AC power connections.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

NAD-M10

Zoeken resetten

  • Hoe wis ik alle afspeellijsten die er al instaan.
    Er staan afspeellijsten in die ik zelf niet heb samengesteld. Gesteld op 11-4-2021 om 15:45

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD M10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD M10 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD M10

NAD M10 Gebruiksaanwijzing - Nederlands - 14 pagina's

NAD M10 Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info