493476
4
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
INTRODUCTION
The HTRM is like having eight virtual remote controls in one. The
eight DEVICE SELECTOR keys can be used to switch between the
different virtual remote controls or devices.
When the HTRM is idle, the name of the currently selected device
will be shown on the first line of the LCD display. Whenever a
function key is pressed, the name of that function will be shown
on the second line of the LCD display. The second line will be
cleared again shortly after releasing the function key.
THE HTRM HAS A TOTAL OF 53 KEYS:
Controls up to 8 Devices
2-line LCD display indicates selected Device (DVD) and sent
Command (PLAY) (for example)
Preprogrammed with all NAD remote commands including
Zone 2
Learning function - learns up to 360 commands from other
remotes
Macro operations - program up to 52 Macros with as many as
64 commands each to automate commonly used command
sequences
Punch Though Operations permit easy access to commonly
used functions without reselecting a device
Full illumination with light sensor and adjustable time out for
easy operation in low light conditions
Can generate IR signals with a carrier frequency up to 500 kHz
(B&O® compatible)
Mini USB PC Interface allows programming from a Personal
Computer
The HTRM is already preprogrammed with a full complement of
NAD commands on its AMP DEVICE SELECTOR page, and with
library commands to operate most NAD DVD, CD, TUNER, or TAPE
components on the corresponding DEVICE SELECTOR keys. These
default commands are permanent: Even if you teach the HTRM
new commands to take their place, the underlying library
commands remain in place and can easily be recalled should you
add an NAD component to your system later.
GETTING FAMILIAR WITH THE HTRM
The HTRM is divided into three main sections. The LCD display
section at the top of the handset, the DEVICE SELECTOR , and
the remaining 44 Control keys. (see Figure 1)
Eight DEVICE SELECTOR keys at the top; AMP, TV, CUSTOM,
CD, DVD, VCR, TUNER, and CABLE/SAT determine which
component the remaining 44 control keys will operate. A DEVICE
SELECTOR key determines what component the HTRM will
command; with factory defaults, it does not perform any function
on the receiver. The DEVICE SELECTOR keys are organised into
three vertical rows of 3 buttons each; the row on the left are all
Audio devices, the row in the center are all Video devices.
Both the DEVICE SELECTOR and function keys that can “learn”
control codes from virtually any infrared remote controller, allowing
you to teach the codes of your equipment, regardless of brand, to
the HTRM. All of the function keys on the AMP DEVICE
SELECTOR are preprogrammed to control NAD amplifiers,
preamplifiers, and receivers. (The HTRM can also command many
other NAD components, from its DVD, CD, TUNER and TV pages.)
Since HTRM Control keys can perform different functions,
depending on the selected DEVICE SELECTOR key, the HTRM
uses colour coding to indicate the function of the function keys
when different device keys are chosen. Thus, the colour of the
DEVICE SELECTOR key-labelling corresponds to the labelling of
the function keys (similar to a calculator).
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
4
HTRM_8lang_v04.qxd 4/26/2006 9:39 AM Page 4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD HTR-M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD HTR-M in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Zweeds als bijlage per email.

De handleiding is 1,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info