745047
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
INTRODUCTION
GETTING STARTED
QUICK START
Refer to the supplied CI 980 Quick Setup Guide for basic instructions in
setting up your new NAD CI 980. The following important notes must also
be observed when setting up your CI 980.
IMPORTANT SETUP NOTES
Before setting up or making connections, ensure that the CI 980 and
other devices to be connected to CI 980 are unplugged or powered
down.
Connect the speaker cables to the supplied speaker connectors by
following the corresponding ZONE (ZONE 1- 4) speaker terminal
connections (R +/-, L +/-) as reected in the CI 980 rear panel.
Bare wire or loose strands from the speaker cables must not touch the
rear panel or other speaker terminals.
After installing the speaker cables to the supplied speaker connectors,
plug in the speaker connector to corresponding ZONE (ZONE 1- 4)
speaker terminal of CI 980.
Connect corresponding end of the mains power cord to the AC mains
input of CI 980 and the plug connected to a mains power source.
Set the POWER switch at the rear panel to “ON” setting (TRIGGER OFF/
ON/AUTO switch set to OFF position). The Standby LED indicator will
illuminate amber. Press the STANDBY button to turn ON the CI 980. The
Standby LED indicator will turn from amber to blue.
SAVE THE PACKAGING
Please save the box and all of the packaging in which your CI 980 arrived.
Should you move or otherwise need to transport your CI 980, this is by
far the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
NOTES ON INSTALLATION
Place your NAD CI 980 on a rm, level surface.
Avoid placing the unit in direct sunlight or near sources of heat and
damp.
Do not place the unit on a soft surface like a carpet.
Do not place the CI 980 in an enclosed position such as a bookcase
or cabinet that may impede the air-ow through the ventilation slots.
Allow adequate ventilation.
Make sure the unit is switched o before making any connections.
The RCA sockets on your NAD CI 980 are color coded for convenience.
Red and white are Right and Left audio respectively. Use high quality
leads and sockets for optimum performance and reliability.
Ensure that leads and sockets are not damaged in any way and all
sockets are rmly pushed home.
Should water get into your NAD CI 980, shut o the power to the unit
and remove the plug from the AC socket. Have the unit inspected by a
qualied service technician before attempting to use it again.
Use a dry soft cloth to clean the unit. If necessary, lightly dampen the
cloth with soapy water. Do not use solutions containing benzol or other
volatile agents.
DO NOT REMOVE THE COVER; THERE ARE NO USERSERVICEABLE
PARTS INSIDE.
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD CI 980 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD CI 980 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD CI 980

NAD CI 980 Gebruiksaanwijzing - Nederlands - 12 pagina's

NAD CI 980 Gebruiksaanwijzing - Deutsch - 12 pagina's

NAD CI 980 Snelstart handleiding - English - 2 pagina's

NAD CI 980 Gebruiksaanwijzing - Français - 12 pagina's

NAD CI 980 Gebruiksaanwijzing - Italiano - 12 pagina's

NAD CI 980 Gebruiksaanwijzing - Espanõl - 12 pagina's

NAD CI 980 Gebruiksaanwijzing - Svenska - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info