745035
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
OPERATION
USING THE C 568  CD MODE
CD-R AND CD-RW AUDIO DISCS
The C 568 can play back CD-R or CD-RW audio discs that have been
recorded on a computer or CD recorder. The quality of CD-R or CD-RW
audio discs varies widely which may aect playability. Some factors that
aect playability:
The quality of the disc itself. Generally speaking, CD-R or CD-RW blanks from
well-renowned companies give better results than unbranded ones.
The quality of CD-recorder or computer CD re/writer. Some recorders
and writers produce better results than others.
The CD-R and CD-RW were created with high-speed writing. In general,
the quality of a CD-R or CD-RW is better when produced at a lower
speed against a higher speed on the same recorder or re/writer.
PLAYING MP3/WMA FILES
The C 568 can play MP3/WMA formatted recordings on CD-R or CD-RW
discs. You may mix any of the le types on the disc. Using the CD 9 remote
control, one can select through the MP3/WMA folders and les as well as
start playback through the following steps
1 Load the applicable disc.
2 Press [FOLDER D/F ] to select desired folder. Press [ENTER].
3 Press [FILE A/S ] to select desired le number. Press [ENTER] to start playback.
NOTES
The le number is recognized per disc, not per folder – that is, the
number assigned to each le corresponds to their sequence in the disc.
If you want to select le number “119” in a disc where there are 100 or
more MP3/WMA les, press “1” twice and then “9.
IMPORTANT NOTICE
Customers should note that permission is required in order to download
MP3/WMA les and music from the Internet. NAD ELECTRONICS
INTERNATIONAL has no right to grant such permission. Permission
should always be sought from the copyright owner.
PROGRAMMING
The program function enables you to store your favorite tracks from any
disc in the player memory. When programming a sequence of tracks, the
C 568 must be in STOP mode. Using the CD 9 remote control, enter your
desired program sequence through the following steps
1 Press [PROG] button of CD 9 remote control. The display indicates “P00
T000”. The “000” in the T000” keeps on blinking, meaning the player is
awaiting the rst Program entry.
2 Use the Direct-Entry numeric keypad buttons to enter the rst track in
your planned sequence. For example, press “5” to enter track number
5. Upon entering the track number, the VFD will show “P01 T005” with
“005” of T005” blinking 3 times.
3 The display will revert to show “P02 T000”, indicating that the player is
ready for your second program entry. For example, press “8” to enter
track number 8. Upon entering the second track, the VFD will show “P02
T008” with “008” of T008” blinking 3 times.
4 Repeat steps 2 and 3 to select and store other track numbers in
memory, up to a maximum of 40 entries.
For programming of CD tracks:
When you reach P40, the three blinking digits will keep on ashing and
won’t stop. This is unlike the previous 39 entries wherein after an entry
blinked thrice, it moves on to the next program number/entry.
For programming of les:
If you attempt to program more than 40 tracks or les, “P-FULL will
be displayed in the VFD.
5 Press [PROG] to end or nalize the program – the VFD will show the last
programmed number and track.
6 Press [u] to start playback of the rst programmed track. Rotate [PLAY/
PAUSE/SKIP] if you wish to SKIP forward/backward the programmed tracks.
NOTES
· If you want to select le number “119” in a disc where there are 100 or
more MP3/WMA les, press “1” twice and then “9.
· Pressing [g] key at any time during the programming procedure will put
to a STOP to the sequence and clear all the currently programmed tracks or
les. VFD will revert back to displaying the total number of tracks and total
playback time for audio CD and total number of les for MP3/WMA.
· Pressing [g] key twice during program playback will result to having the
whole program list deleted.
REVIEW/EDIT PROGRAM LIST
1 Initiate review of your programmed entries by pressing [PROG].
· If you are still in programming mode, press [PROG].
· If during program playback, press [g] once, then [PROG].
2 The VFD will show the rst Program Number and the corresponding
“blinking” programmed track.
3 To change the programmed track of a particular sequence, use the
Direct-Entry numeric keypad buttons. Press [9/0] to move forward
or backward the programmed tracks as well as review the list and
change if so desired.
4 If you want to delete a particular program sequence during program
review, press [CLEAR] key.
Example: Delete “P34 T067” from a total of 40 program entries
(display) “P34 T067” $ [CLEAR] $ (display) “P34 T000” (“000” blinking)
$ enter desired track/song number to replace T067 or press [PROG] to
nalize deletion process
If [PROG] is pressed without entering a new track/song number, the total 40
program entries will be reduced to 39 entries. The program sequence will
adjust accordingly starting from the deleted program number.
5 After nalizing your program changes or completing your review, press
[PROG] again.
PROGRAM PLAYBACK
1 To play the stored program, press [u] while you are in “PROGRAM”
mode. “PROG” icon will appear in the display, indicating that a stored
program is being played. During Program Play, the SKIP buttons will
access only the tracks in the program list.
2 If you want to play only a portion of a stored program, initiate play and
press SKIP to jump over the programmed tracks that you don’t want to
hear.
STOP OR DELETE PROGRAM
1 To terminate Program play, press [g] once. The stored track list remains
in memory. If you want to play the program again, simply press [u].
2 To clear the program memory, perform any of the following steps
· Press [g] twice during program playback.
· Press [k] to open the disc tray.
· Switch OFF the C 568 by pressing the Standby button.
· Switch to another source other than CD mode by pressing front
panel’s [SOURCE] button or [USB] source button in CD 9.
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NAD C 568 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NAD C 568 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van NAD C 568

NAD C 568 Gebruiksaanwijzing - Deutsch - 18 pagina's

NAD C 568 Gebruiksaanwijzing - Français - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info