102808
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
CONNECTING TO PC/TRANSFERRING FILES
Driver Istallation
The USB driver on the CD is exclusively for Windows 98 computers. Installing the USB driver on
computers running Windows 2000/ME/XP is not necessary.
1. Insert the CD that came with the camera into your CD-ROM drive. The welcome screen appears.
2. Click “INSTALL USB DRIVER”. Follow the on-screen instructions to complete the installation. After
the USB driver has been installed, restart your computer.
Macintosh OS 9.0 computers
For Mac OS 9.0 or higher, the computer will automatically
recognize the camera and load its own USB drivers.
Downloading Your Images
When the camera is turned on and connected to your computer,
it is considered to be a disk drive, just like a floppy disk or CD.
You can download (transfer) images by copying them from the
“Removable disk” (“untitled” or “unlabeled” disk on a Macintosh)
to your computer hard drive.
Windows
Open the “removable disk” and subsequent folders by double
clicking on them. Your images are inside these folder(s). Select
the images that you want, and then choose “Copy” from the
“Edit” menu. Open the destination location (folder) and choose
“Paste” from the “Edit” menu. You may also drag and drop
image files from the camera to a desired location.
Macintosh
Open the “untitled” disk icon, and the destination location on your hard disk. Drag and drop from the
camera to the desired destination. Do not open the battery cover during USB cable connection.
10
BASIC PLAYBACK
Still Image
Video
1. Slide the mode switch to [ ].
The last image appears on the screen.
2. Select the desired video clip with the W/Xbuttons.
A [ ] icon is displayed with the video data.
3. Press the SET button to play back a video clip.
Pressing the X/W buttons during playback initiates fast forward/fast reverse.
To stop video playback, press the T button.
This stops playback and returns to the start of the video clip.
To pause video playback, press the SET button.
This pauses video playback. To cancel pause, press the SET button again.
1. Slide the mode switch to [ ].
The last image appears on the screen.
2. The images can be fed in reverse or fed forward with the W/
X buttons.
8
PRINTING IMAGES (PictBridge)
If a printer that support PictBridge is available, images can be printed by connecting the camera directly to
the PictBridge-compatible printer without using a computer.
1. Turn on your camera.
2. Set the mode dial to [ ].
3. On the [Basic] menu, select [USB] with the S /T buttons,
and press the SET button.
4. Select [PictBridge] with the S /T buttons, and press the
SET button.
5. Connect one end of the USB cable to the USB terminal of
the camera.
6. Connect the other end of the USB cable to an available USB
port on your computer.
7. Select the item you want to configure with the S/T buttons,
and press the SET button.
[Images]: Select whether you want to print specific image
or all images. You may also select printing
number for specific image.
[Date Print]: According to the printer type, select whether you
want to print the image with date imprint or not.
[Paper Size]:Select the desired paper size according to the
printer type.
[Layout]: Select the desired printing layout according to
the printer type.
[Print]: After all settings is configured, select this item
to start printing.
11
8. If you select [Images] in the previous step, the figure shown
on the right hand side will appear. Select [Single] or [All] with
the S/T buttons, and press the SET button.
9. If you select [Single] in the previous step, the figure shown on
the right hand side will appear.
Select the image that you want to print with the W/X
butons.
Select the printing number (up to 99) with the S/T buttons.
After selecting the desired image and printing number,
press the SET button to confirm.
10.Select [Exit] with the S/T buttons, and press the SET button.
ERASING AN IMAGE
1. Slide the mode switch to [ ].
2. Press the button.
The deletion menu will be displayed.
3. Select [Select] with the S /T buttons, and press the SET
button.
The images are displayed in the thumbnail display.
4. Select the image you want to delete with the S /T /W /X
buttons, and press the button.
The [ ] icon will be displayed. One more press of the delete
button will cancel the operation. Repeat this procedure
and select all the images that you want to delete.
5. Press the SET button.
9
100-0010100-0010
PictBridge
Adjust
Adjust
11.Select [Print] with the S/T buttons, and press the SET
button to start printing.
12.The printing starts and the figure shown on the right hand
side appears.
The [Complete] screen will be displayed temporarily,
reminding you that the printing procedure is finished.
If a print error is detected, the [Print Error] screen will be displayed.
Select Page
Select Item
Adjust
Adjust
Adjust
Adjust
Printing
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mustek MDC 830Z bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mustek MDC 830Z in de taal/talen: Engels als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info