30266
2
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
Instructions
Page 57
1. Contents
1. Contents 57
2. Introduction 59
3. Safety notes 59
3.1. General safety notes 60
3.2. Range checking 61
4. Liability / Compensation 62
5. Guarantee 62
6. Specification 62
7. The transmitter 63
7.1. Front face of transmitter 63
7.2. Rear face of transmitter 63
7.3. Inside the transmitter 64
7.4. Mechanical details 64
7.4.1. Opening and closing the transmitter case 64
7.4.2. Adjusting the transmitter aerial,
fitting a new aerial 65
7.4.3. Installing and removing the RF module 65
7.4.4. Changing the transmitter crystal
(HFM-4 module only) 66
7.4.5. Changing the transmitter battery 66
7.4.6. Disabling the stick neutralisation system,
installing the spring for ratchet or friction
operation 66
7.4.7. Adjust the neutralising force 66
7.4.8. Swivelling the stick units 67
7.4.9. Adjusting and replacing the stick tops 67
7.4.10. Stick top with buttons
- how to fit them, how they work 67
7.4.11. Installing the optional switches “P” and “K” 68
8. The transmitter battery 68
8.1. Battery management in the ROYALevo 68
8.1.1. This is what we have already 68
8.1.2. This is NEW 69
8.1.3. This is what you must attend 69
8.2. The essentials in brief 69
8.3. Safety notes 69
8.4. Charging the transmitter battery 70
8.5. Maintaining and storing
the transmitter battery 70
8.6. Recycling 70
9. Using the transmitter 71
9.1. Switching on for the first time 71
9.2. The power-ON procedure 71
9.2.1. Switching ON
with the HFM-4 RF module for crystals 71
9.2.2. Switching ON
with the HFM-S synthesizer RF module 71
9.2.3. Switching ON
without transmitting an RF signal 71
9.3. Security queries when switching ON 72
9.3.1. Throttle check 72
9.3.2. RF Check with the synthesizer module 72
9.4. Selecting the channel with an HFM-S
synthesizer RF module 72
9.5. The RF status display (red LED) 72
9.6. The status displays 73
10. The basic operating philosophy 74
10.1. The keypad 74
10.1.1. Direct menu access buttons (row 1) 74
10.1.2. Task buttons (row 2) 74
10.1.3. Text input 74
10.2. The 3-D digi-adjustors 75
10.2.1. Programming
using the 3-D digi-adjustors 75
10.2.2. Making adjustments
using the 3-D digi-adjustors 75
10.3. Working with the keypad and 3-D digi-
adjustor -the fundamental operating
philosophy 75
10.3.1. Calling up main menus 75
10.3.2. Opening sub-menus 76
10.3.3. Changing values 76
10.3.4. Returning from whence you came 77
11. Digital trims 77
11.1. Introduction 77
11.2. Advantages of digital trims 77
11.3. The cruciform digital trim assembly 78
11.4. On-screen trim display 78
12. Creating a new model 78
12.1. Basic information 78
12.2. A new fixed-wing model 78
12.3. A new helicopter 79
12.4. Model templates in detail 83
12.5. Template: BASIC 83
12.5.1. Assigned transmitter controls and switches 83
12.5.2. Assigned servos / receiver outputs 83
12.5.3. Fine-tuning 83
12.6. Template: ACRO 84
12.6.1. Assigned transmitter controls and switches 84
12.6.2. Assigned servos / receiver outputs 84
12.6.3. Fine-tuning 84
12.7. Template: HOTLINER 84
12.7.1. Assigned transmitter controls and switches 84
12.7.2. Assigned servos / receiver outputs 84
12.7.3. Fine-tuning 84
12.8. Template: DELTA 85
12.8.1. Assigned transmitter controls and switches 85
12.8.2. Assigned servos / receiver outputs 85
12.8.3. Fine-tuning 85
12.9. Template: GLIDER 85
12.9.1. Assigned transmitter controls and switches 85
12.9.2. Assigned servos / receiver outputs 85
12.9.3. Fine-tuning 85
12.10. Template: 4-Flaps 86
12.10.1. Assigned transmitter controls and switches 86
12.10.2. Assigned servos / receiver outputs 86
12.10.3. Fine-tuning 86
12.11. Template: HELImech 86
12.11.1. Assigned transmitter controls and switches 86
12.11.2. Assigned servos / receiver outputs 86
12.11.3. Fine-tuning 86
12.12. Template: HELIccpm 87
12.12.1. Assigned transmitter controls and switches 87
12.12.2. Assigned servos / receiver outputs 87
12.12.3. Fine-tuning 87
13. Main menu „Setup“ LL 87
13.1. Sub-menu „Transmitter“ 87
13.1.1. Parameter „Trim graphics“ 87
13.1.2. Parameter „Sounds“ 87
13.1.3. Parameter „Battery alarm“ 87
13.1.4. Parameter „Battery charge“ 88
13.1.5. Parameter „Contrast“ 88
13.1.6. Parameter „ Check throttle “ 88
13.1.7. Parameter “Check RF” 88
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex ROYALevo12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex ROYALevo12 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Multiplex ROYALevo12

Multiplex ROYALevo12 Gebruiksaanwijzing - Deutsch - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info