561570
13
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
13
If you already own a suitable motor, the driver and spinner can be purchased separately:
Propeller driver, blade holder and spinner Order No. 73 3183
Two-blade propeller blades, 12 x 6”, for Cularis Order No. 73 3173
MULTIPLEX Li-BATT BX 3/1-2100 flight battery 3 / 2100 mAh Order No. 15 7131
Receiver battery (NiMH) (caution: special pack format) 4 / 1800 mAh-AA-2L Order No. 15 6010
Additional item for the glider version only
Receiver battery (NiMH) 4 / 1800 mAh-AA-W Order No. 15 6007
Tools: Scissors, balsa knife, M3 screwdriver, combination pliers, optional soldering iron.
Note: remove the picture pages from the centre of the building instructions.
Specification: Cularis
Wingspan 2610 mm
Fuselage length 1260 mm
All-up weight glider approx. 1400 g
electric approx. 1680 g
Wing area (FAI) approx. 55 dm²
Wing loading approx. 24,5 / 30,5 g / dm²
RC functions Elevator, rudder, ailerons and butterfly (crow - spoiler)
Optional Throttle / aero-tow release
Important note
This model is not made of styrofoam™, and it is not possible to glue the material using white glue or epoxy. Please be sure to
use cyano-acrylate glue exclusively, preferably in conjunction with cyano activator (“kicker”). We recommend high-viscosity
(thick) cyano. This is the procedure: spray cyano activator on one face of the Elapor®; allow it to air-dry for at least two minutes,
then apply cyano adhesive to the other face. Join the parts, and immediately position them accurately.
Please take care when handling cyano-acrylate adhesives. These materials harden in seconds, so don’t get them on
your fingers or other parts of the body. We strongly recommend the use of goggles to protect your eyes.
> Keep the adhesive out of the reach of children! <
Warped parts - do vary. For example, if something becomes bent or distorted in transit, it can usually be straigh-
tened again; in this respect it behaves in a similar manner to metal. Bend the part back, slightly “beyond
straight”, then release it: the material springs back slightly, and resumes its original shape. But everything has
its limits - so don’t overdo it!
Warped parts - do exist! If you wish to paint your model, wipe the surface lightly with MPX Primer, # 60 2700, as if you
were cleaning the model. Apply the paint in even coats, but not too thickly, otherwise the model will indeed warp. If you
overdo it, the painted part will be overweight as well as distorted, and will often be useless! In our experience matt paints
give the best results in terms of appearance.
1. Before assembling the model:
Please check the contents of your kit.
You will find Figs. 01 + 02 and the Parts List helpful here.
Caution: the packaging is more than just transit protec-
tion; the wing panels are glued together with the help of
the specially shaped bottom section of the foam packa-
ging. Without this jig your wings will not turn out straight!
See Fig. 07.
Please keep to the sequence described in these instructions -
we’ve invested a lot of thought in the procedure.
COMPLETING THE WINGS
2. The first step is to prepare the aileron and flap servos.
Check the cable lengths, and connect extension leads to them
if required. Note that the servo leads must extend about 3 - 5
cm out of the wing root when the servos are installed. Position
the servos using the spar covers as an aid. If you are not
using the specified servos you may need to adjust the servo
openings, but don’t enlarge them to the point where the servo
well covers no longer fit in the apertures.
Glue the servos in the wings using cyano, ensuring that the
glue does not penetrate inside the servo cases. Lay the servo
leads in the channels and secure them with pieces of adhesi-
ve tape.
Figs. 03 - 05
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex Cularis 21 4218 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex Cularis 21 4218 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info