683985
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
BA FU30pro HM; DE,GB - 22895 - EIGENDRUCK - V05
Radio receiver GPS-time FU 30 pro
Safety issues Technical
data
!
!!!ATTENTION!!! Risk of fire and electric shock! Installation and
assembly of electrical equipment must be carried out by skilled
person!!!
!
Connect the supply voltage/frequency as stated on the product
label!
!
Warranty void if housing opened by unauthorised person!
!
The electronic circuit is protected against a wide range of external
influences. Incorrect operation may occur if external influences
exceed certain limits!
Supply voltage
12 -
30VDC SELV (max. 10,8 - 32VDC)
/
/ supply
= extern
Power consumption
Ø 30mA at 12V / 15 mA at 30V
Output signal
DCF time telegram (no weather data)
Polarity output signal LOW activ
Output type Open Collector wiring:
Umax. 50 VDC
Imax. 80 mA
Max. output power 200 mW
Output voltage LOW 2,5 VDC
Protection type
IP 54
to DIN EN 60529
A
mbient temperature
-30°C … 55°C
Specifications // Compliance
EN 60730 // CE
Housing
self-extinguishing thermoplast
A
ssembly
wall mounting with mounting bracket
Recommend wire
shielded
/
cross-section 0,33 to 2,5 mm2
Subject to technical changes
Connection diagram Installation instruction
Make sure that the GPS time receiver
(top of the device) has free view to sky. Trees, walls, and so on, can
severely degrade the satellite reception capability of the receiver.
Make sure that there are no transformers, relays, switches, or similar devices within a radius of one meter
around the GPS time receiver.
If mounted on wall, avoid electric cables and other disturbing metal in the wall.
If the LED on the bottom side of the device is NOT flashing:
Check proper connection
The LED on the bottom side of the device is flashing fast (5 Hz):
Connection OK / device is waiting for GPS signal (can take up to 15 minutes)
The LED on the bottom side of the device is flashing slow (1 Hz):
Connection OK / GPS signal OK
If the LED on the bottom side of the device is flashing fast longer than 15 minutes (5 Hz):
Possibly no GPS signal. Try to use an alternative position.
It will take several minutes until the time switch is synchronized and the FU/GPS-symbol is displayed
permanently in the time switch.
Installation and connection of the device
Connection / wall mounting
Remove both screws on the bottom side and remove the bottom cover.
Guide wire through the cable sleeve and the hole of the bottom cover.
Connect wire with terminal block according to the above connection diagram.
Assemble cable sleeve on the bottom cover.
Screw the bottom cover.
Install wall mounting bracket and attach GPS time receiver (see drilling plan).
Wiring
Connect GPS time receiver and time switch such that the wiring is not between the mounting wall and the
GPS time receiver.
Max. wire length: 200m
Wire cross-section : 0,33 to 2,5 mm
2
Avoid parallel placement with other cables,e.g., electric cables, telephone wires, and so on.
RECOMMENDATION: We recommend shielded wires
Display of the time switch Description LED GPS time receiver // FU/GPS-symbol of the time switch
Flashing of the FU/GPS-symbol in the display of the time switch indicates proper connection between time
switch and GPS time receiver after installation.
PLEASE OBSERVE: It can take up to 15 minutes until the FU/GPS-symbol appears/flashes after connecting
the GPS time receiver to the time switch.
The FU/GPS-symbol may flash up to 5 minutes while the time switch is being synchronised. Eventually, after
synchronisation of the time switch, the FU/GPS-symbol
is displayed permanently.
The FU/GPS-symbol is not shown, if the GPS time receiver cannot receive a (valid) GPS signal. Time
accuracy of the time switch is based on its internal quartz.
!!PERMANENT DISPLAY OF THE FU/GPS-symbol
= TIME SWITCH IS SYNCHRONISED!!
LED on the bottom side of the
GPS time receiver
FU/GPS-symbol of the time
switch
STATUS
LED off
The FU/GPS-symbol
is not
visible in the display
=> No supply voltage
=> Wrong connection
LED flashes fast (5 Hz)
The FU/GPS-symbol
is
flahing in the display
=> Waiting for GPS signal
=> Synchronisation of time switch
LED flashes slow (1 Hz)
The FU/GPS-symbol
is
permanently visible
=> Valid
GPS
signal
=> Time switch is synchronised
Description DIP switches // Switch positions Drilling plan for wall mounting bracket
!!!NOT TRUE TO SCALE!!!
Switch A Switch B Switch C Switch
D
Switch
E
Switch
F
ON
Daylight saving time
ON*
GMT-offset [+]
GMT offset
1 hour
GMT
offset
2 hour
GMT
offset
4 hour
GMT
offset
8 hour
OFF
Daylight saving time
OFF*
GMT- offset [-]
no
offset
no
offset
no
offset
no
offset
*European daylight saving time rules
Switch position for DCF output signal [default]
[Please note that the DCF signal is without weather broadcast!s]
Switch position for UTC output signal [GMT]
Take care of the environment!
Recycle properly!
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Muller FU 35.00 pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Muller FU 35.00 pro in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Muller FU 35.00 pro

Muller FU 35.00 pro Gebruiksaanwijzing - Français, Italiano - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info