749030
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
English
4
If you want to switch back the mr Safe station to tone-operated,
you have to follow this procedure:
Press PROG.
Press 3 and then 0.
Again press PROG.
After pressing 0, you will see TON appear on the display.
If you have a switching system or ISDN adapter, you have to set
the same at ‘direct outward dialling system’. This way, it is not
necessary to dial an extra 0 prior to the telephone number.
CHECKING THE INSTALLATION
If the telephone line, adapter and batteries are properly placed,
the device is in standby, and the green ‘Power’ LED is burning.
If also the red ‘Batt. Lo’ LED is burning, the batteries are almost
empty or not properly placed. In this case, the batteries need to
be replaced. If you press one of the alarm keys of the mr
Safe station or remote control for at least 2 seconds, you will
hear the alarm tone from the mr Safe station. As soon as
this tone stops, the mr Safe station will contact the care
providers. To this effect, you need to set the telephone
numbers and alarm messages first. This is described in the
following chapters.
SETTING CALLS TO CARE PROVIDERS
(FAMILY, NEIGHBOURS, ETC.)
The mr Safe system has 2 different alarm buttons, a red one
and a blue one. These can be set distinctively, in various
ways: for example loud and quiet alarm, urgent and less
urgent alarm, or day and night alarm. It is possible to enter
a maximum of 4 telephone numbers per alarm button, eg.
of family, neighbours, acquaintances etc., the so-called
informal care.
The setting of these telephone numbers is realized as follows:
Press PROG.
Press the alarm button where you want to enter a
telephone number.
Choose 1, 2, 3 or 4 for the first, second, third or fourth
alarm number.
Enter the telephone number.
Press PROG.
We advise you to write down the entered telephone numbers
in this manual. See last page of the manual. Apart from
that, it is possible to verify the set telephone numbers:
Press PROG.
Press the alarm button of which you would like to
verify the numbers.
Press 1, 2, 3 or 4 for the first, second, third or
fourth alarm number.
Now the set number is displayed. Press STOP to exit.
M_mr.Safe_GB.pmd 23.12.2004, 16:184
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mr Safe Personal security system bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mr Safe Personal security system in de taal/talen: Engels als bijlage per email.

De handleiding is 0,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info