6
2.
Fit the chopper or grinder blade unit
(H2 or I2)
onto the chopper or grinder lid
(H1 or I1)
. Lock
the blade unit by turning it clockwise (Fig. 4).
3
.
Turn the assembled chopper or grinder
accessory upward. Place the chopper or
grinder accessory onto the motor unit
(
G)
and
lock it (Fig. 5).
4
.
Plug in the appliance and switch it on by
pressing the low-speed or high-speed button
(
E or F)
.
The chopper or grinder will not operate unless
the blade unit has been correctly fitted.
5
.
Hold the accessory firmly with both bands
during operation. Do not operate the accessory
for more than 30 seconds at a time.
6
.
You can store the preparation in the fridge by
removing the chopper or grinder blade unit,
and covering the lid with the seal
(
J)
.
CLEANING
RECYCLING
• Unplug the blender and remove all the
accessories.
• Handle the blades
(
H2 or I2)
with care as they
are very sharp.
• Wipe the motor unit
(
G)
down with a damp
cloth. Dry carefully.
• Never plunge the motor unit
(
G)
into running
water.
• To make cleaning easier, always wash the
removable parts in warm water and washing
up liquid immediately after use.
• The blender jug
(
C)
, the lid
(
B)
, measuring cap
(
A)
and the accessories
(
H1, I1 & J)
may be
cleaned in the dishwasher in the upper tray,
only using the “ECO” or “SLIGHTLY SOILED”
programme.
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point so that it can be recycled.
HELPLINE:
If you have any product problems or queries, please contact our Customer Relations Team first for ex-
pert help and advice:
0845 602 1454 - UK
(01) 677 4003 - Ireland
