KOREAN
RYDIS R750
User Manual
31
⑪ Macro setup button
⑫ Macro selection button
⑬ Mute tone button
⑭ Time adjustment button
⑮ Reservation setup button
MS (motion control) button
Starts/cancels macro setup. (See the page 25.)
Selects a macro number to be set or executed. (See the page 25.)
Turns on and off operation announcement tone
Used to set current time (See the page 23.)
Used to make reservation setup (See the page 23.)
Press this button to use the remote controller as motion-controlling tool (See the page 20-22).
How to set synchronization of the remote controller
In initial use or with a newly-bought remote controller due to loss of the existing remote controller
or other reasons, you need to synchronize the robot cleaner with the remote controller.
1. Turn off the power switch at the side of the main body.
2. While pressing the power switch at the upper part of the main body, turn on the power
switch at the side of the main body.
4. While pressing the OK button from the remote controller, re-insert the battery in.
5. Turn off and then on the power switch at the side of the main body.
6. Pull out and then re-insert the battery of the remote controller.
3. Pull out one battery of the remote controller.
The display of the main body will start blinking for synchronization.
The OK button of the remote controller will turn on and then off in red and blue in turn.
The synchronization will be completed in a few seconds.
If the main body is 3 meters or more distant from the remote controller, the synchronization will fail.
The synchronization will be completed.
