632491
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
HD-SDI Miniature Cameras
Please read these operating instructions carefully prior to
installation and keep them for later use.
1 Applications
These high-resolution colour cameras are especially
designed for use in video surveillance systems (CCTV).
They are equipped with a 4.3 mm fixed-focus lens. Cam-
era features include automatic day/ night switching, back-
light compensation, digital noise reduction, mirror-
inverted image display, zoom, motion detection and a
masking function to cover zones that are not to be moni-
tored. The cameras are equipped with a digital output
(SDI) for high-resolution image signals (HD) and with an
analog output for testing purposes.
2 Safety Notes
The camera corresponds to all relevant directives of the
EU and is therefore marked with
.
G
The camera is suitable for indoor use only. For outdoor
mounting, the camera must be placed into a weather-
proof protection housing.
G
Protect the camera against dust, humidity and heat
(admissible ambient temperature range:
-
10 °C to
+50 °C).
G
For cleaning only use a dry, soft cloth; never use water
or chemicals.
G
No guarantee claims for the camera and no liability for
any resulting personal damage or material damage will
be accepted if the camera is used for other purposes
than originally intended, if it is not correctly installed or
if it is not repaired in an expert way.
3 Installation
1) To find the optimum place of mounting, make a test
run.
2) Use the camera support to fasten the camera to the
ceiling or the wall, for example.
3) Use a 75 Ω cable to connect the BNC jack (4) to the
SDI video input of a monitor. The maximum cable
length possible depends on the cable quality. With
the low-loss special cable KHD-1 from MONACOR,
the maximum cable length is 170 m. Repeaters (e. g.
HDEXT-206) can be inserted to support cable lengths
of several hundred meters.
4) For testing purposes, an additional analog low-resolu-
tion video signal is available at the BNC inline jack (5).
5) Connect a regulated 12 V power supply with a perma-
nent rating of 120 mA to the red inline jack (3). A low-
voltage plug 5.5 / 2.1 mm (exterior / interior diameter) is
required. Make absolutely sure to observe the correct
polarity (centre contact =+).
6) Switch on the monitor connected and align the camera
by means of the monitor image: Loosen the setscrew(s)
(2) at the camera support, and position the camera as
desired. Then tighten the screw(s) again.
4 Adjustments via the On-screen Menu
The on-screen menu is operated by means of the control
lever (1). To display the on-screen menu, press the con-
trol lever. The main menu appears:
To select a menu item, tilt the lever vertically ; to change
the value or to select an option, tilt the lever horizontally
. When the symbol
appears behind a menu item or
option, the lever can be pressed to call up a submenu or
to activate a function.
Please refer to the reverse page of these instructions for
a tabulated list of all available setting options.
MENU
EXPOSURE
WHITE BAL
DAY&NIGHT
BACKLIGHT
3D-DNR
IMAGE
MONITOR
SYSTEM
EXIT
If the camera is to be put out of operation defin-
itively, take it to a local recycling plant for a dis-
posal which is not harmful to the environment.
®
HDCAM-1010
HDCAM-1020
®
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany Copyright
©
by MONACOR INTERNATIONAL. All rights reserved. A-1552.99.01.04.2014
Order No. 18.3530
Order No. 18.3540
To exit the menu, select the line
EXIT and press the lever.
If the lever is tilted to the left or the right while the menu is
not displayed, special menus will appear; the options of
these special menus are only designed for making the
basic factory settings during camera manufacturing
and should not be changed. Select the line
EXIT (= last
menu line) to exit these special menus.
5 Specifications
Image sensor: . . . . . . . . . CMOS chip, 8.5 mm (
1
3″)
2 megapixels, progressive
scan
Number of pixels: . . . . . . . 1920 × 1080 max.
Lens: . . . . . . . . . . . . . . . . 4.3 mm/ 1 : 2.0
Minimum illumination: . . . 1 lx (colour)
0.5 lx (B/W)
SDI video formats: . . . . . . 1080p30, 1080p25,
720p60, 720p50
Analog video output: . . . . PAL / NTSC, 1Vpp / 75 Ω
S / N ratio: . . . . . . . . . . . . . > 50 dB (AGC off)
Power supply: . . . . . . . . . 12 V
, 120 mA
Admissible temperature: .
-
10 to +50 °C
Dimensions, weight
HDCAM-1010: . . . . . . . 30 × 30 × 20 mm, 100 g
HDCAM-1020: . . . . . . . 25 mm × 47 mm, 100 g
Subject to technical modification.
GB
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Monacor HDCAM-1020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Monacor HDCAM-1020 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info