30512
20
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
20
• There is no audio and video from the IEEE  device. • The device is not turned on - turn the device power on.
• No media (tape or disc) is inserted into the device.
• The media is blank (has no recording).
• The play command failed - Try pressing play again on the
device’s remote control or front panel.
• The device is already in use (for example the device is currently
recording).
• The source is copy-protected or violates copy-protection.
• The device’s digital video signal is not supported by the TV, such as
DV video common with camcorders. Use analog connections instead,
if available.
• The device is not an audio/video device.
• Too many other devices are already communicating over
IEEE . Remove or stop some devices and try again.
• The IEEE  device cannot be selected. • Both IEEE  devices and Ant-DTV can not be displayed in the
PIP.
• The device may be busy, either recording or a peer-to-peer
connection has been established. Cancel the recording or
peer-to-peer connection.
• The IEEE  Device is not listed in the Device Selection
menu.
• The device is unchecked in the Review screen.
Go to Setup in the Main menu, select Edit NetCommand Setup,
then select Review. Verify the device is checked.
• The IEEE  plug is disconnected or loose.
• The IEEE  Device has not been powered On. Turn on the
device’s power.
• The device has not been discovered.
• The device is not an Audio/Video device.
• Cannot record to or from the IEEE  device, including Dub
recordings
• To initiate a recording to IEEE  device, first select the
source device to record, such as Ant-DTV (NOT the recording
device). Then press the REC key. The Record/Connect menu
displays allowing setup of the recording.
• The source device for the recording is not powered on.
• For a dubbing, the destination device for the recording is not
powered on.
• The wrong media, (analog tape for digital recording, or
digital tape for the analog recording) is in the device.
• Either the program is copy protected, or if there are multiple
subchannels and one of the programs (not necessarily the
program requested) is copy protected.
• The program has already been recorded once and the copy
protection only allows one recording.
• Unapproved source device for copy protected material.
• The recording device can not decode the copyright signal
included in the signal source (try another device if available).
• The playing device (for dubbing) does not support copyrighted
material.
• Source for recording is copyrighted.
• Too many IEEE  devices in network. Insufficient bandwith
available. Disconnect unused devices.
• Source Device has higher speed (S ) than record device. If
possible, reverse devices, play in the slower device and record in
the faster device.
• DEVICE MENU button does not display a menu. • The IEEE  device does not provide a menu.
• Cannot control the IEEE  device from the Transport Menu. • Device may not support the command.
• Selected function is gray (such as Record for a DVD, which does
not support the Record function.
Problem Possible Solution
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mitsubishi HD5000A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mitsubishi HD5000A in de taal/talen: Engels als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info