658471
187
Verklein
Vergroot
Pagina terug
1/666
Pagina verder
Solo system 147
PRO Series Live Audio Systems
Owner’s Manual
>> To activate SIP
1 Do one of the following:
On the control surface, lift up the cover of the solo in place button and then
press the button.
At the GUI, choose home
Monitors. Then click solo in place.
2 In the “Activate SIP ?” message window, click OK.
>> To deactivate SIP
Press/click the solo in place button (control surface or GUI).
C/O switch
The C/O (a/b speaker) switch (control surface only) swaps
speakers A with speakers B. The button’s LED illuminates when the B
set of speakers are on.
Monitor output (a and b) sections
The monitor output sections — output a and
output b — have common controls for the monitor A
and B sections. The monitor’s output level is
controlled by a non-automated fader, a DIM switch
and left and right mutes (see Figure 20 “Monitor A
and B strips” on page 144).
The buttons in each output section have an integral
LED for on/off indication, and have the following
functions:
MONO/[MON] switch, sums left and right signals,
but with a ±3dB loss. With 0dB on monitor A left
and nothing on monitor A right, pressing MONO
gives -3dB on both monitor A left and monitor A right. However, with 0dB on both
monitor A left and monitor A right, pressing MONO gives +3dB on them both.
ø/[PHS] phase reverse switch, reverses the phase of the right monitor signals.
LEFT/[LFT] and RIGHT/[RGT] switches, route left and right monitor signals,
respectively, to both left and right monitor speaker outputs. These switches can be
used in combination, as shown in Table 11 below.
Table 11: Monitor signal routing
LEFT
button
RIGHT
button Monitor signal routing
Off Off Left and right monitor signals are routed normally, that is,
left monitor signal is routed to the left monitor speaker
output, and the right one is routed to the right monitor
speaker output.
On Off Left monitor signal is routed to both of the monitor speaker
outputs.
Off On Right monitor signal is routed to both of the monitor
speaker outputs.
On On Left and right monitor signal routing is swapped over, that
is, left monitor signal is routed to the right monitor speaker
output, and the right one is routed to the left monitor
speaker output.
187

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Midas PRO3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Midas PRO3 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info