715818
12
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Prodomus
12
ON / Off switch with level I and II
extremely sharp!
Place the piece holder on the back of the sliding feet table.
Caution: Always use the food support to push the
food for- and backward!
Adjust the desired size of slices by turning the adjusting
switch (see picture to the right). The scale on the switch
helps to find the desired size of slices. For thin slices turn
the switch clockwise, for thick slices turn it counter
clockwise.
Position 0 for safety reason covers the blade.
Now plug in.
Put the food to be sliced onto the
slicing feed table and take the transparent piece
holder to hold the food safely.
Now switch the ON/OFF switch into position I.
The food slicer will operate.
If switching into position II (pulse) the ON/OFF switch
must be pressed all the time. When releasing the switch the motor will stop.
Move the slicing feed table by slightly pushing the food holder forward.
Caution! Risk of injury! Always be extremely carefull while cutting food. Take care
not to get in direct contact with the sharp blade!
To switch off put the ON/OFF switch into position 0. For safety reason always unplug
after each use and before cleaning!
Clean the unit after each use because it is in contact with food.
Cleaning and maintainance
Caution danger of electric shock! Before cleaning always switch off the appliance and
unplug. Never immerse the appliance cord and plug into water!
Caution risk of injury! The blades of the appliance are very sharp! Keep this in mind
when cleaning or changing the blades.
Remove piece holder and wash separately. Wash sliding feed table on both sides and the
housing with a soft cloth or sponge and a mild soap or spray cleaner. Rinse and dry. Do
not wash any part of food slicer in dishwasher. Never use steel wool or scouring powder on
any part of food slicer!
Cleaning the blade
Caution: the blade is very sharp - risk of injury! Careful when
taking off and cleaning!
Never open the three small screws. It is not necessary and can
cause damage!
To clean or change the blade it can be taken off by turning the
black screw to release the blade.
Unscrew the big black screw by turning it to open (see picture
to the right “Cleaning the blade”).
After cleaning install the blade with the big black screw again.
. Ensure to attach the blade exactly into position.
The blade must be positioned exactly into the hole on the drive gear. If it does not fit
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mia SM2796N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mia SM2796N in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info