465667
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
PROGRAMMED PLAYBACK
The CD player can be programmed to play any sequence of up to 20 tracks.
1. Always press the Stop Button before the programming.
2. Press the PROGRAM button on the unit, and the program number
“01” and PLAY/PROG. Indicator will be flashing on the display.
3. Press Previous/Next buttons repeatedly to select the desired track
number.
4. Press the PROGRAM button again to confirm and save your selection,
and02will be displayed soon.
5. Repeat the previous steps 3 and 4 by selecting the track number of your choice, and the
tracks will be saved in order.
6. When you have entered all track numbers that you want, press the PLAY/ PAUSE button
to begin playing the programmed sequence of tracks and the program indicator will flash.
7. To play all programmed tracks repeatedly by pressing the REPEAT button. To erase your
programmed tracks, press the Stop Button in program mode, or open the CD door, or
change to another function mode RADIO, and normal playback will resume.
Note: Programming can be operated when the player is in STOP mode.
COMPACT DISCS
Treat compact discs carefully. Handle them only by their edges. Never touch the shiny,
unlabelled side of the disc by your fingers.
Do not put adhesive tape, stickers etc. on either side of a disc.
Clean discs periodically with soft, lint-free and dry cloth. Never use detergents or abrasive
cleaners to clean discs. If it is necessary, use a CD cleaning kit.
If a disc skips or gets stuck during playback, it is probably dirty or damaged.
When cleaning a disc, wipe in straight lines from the centre of the disc to its edge. Never wipe
in circular motions.
When removing a disc from its storage case, press down on the centre of the case and lift the
disc out, holding it carefully by its edges.
Fingerprints and dust should be carefully wiped off the discs recorded side with a soft cloth.
Unlike conventional records, compact discs have no grooves to collect dust, so gently wiping
with a piece of soft cloth should remove most particles.
3. USING THE AUX IN FUNCTION
You can enjoy the music of a digital MP3 player, Cassette Deck, Mini Disc player, etc. Insert
an audio cable (Supplied) with 3.5mm plug on each end into the HEADPHONES jack or line
out of your com puter, and the other end into the AU X in jack on the rear of the
unit.
The auxiliary function will only be support
ed when the AUX in jack has a suitable sound
source connected via an LINE cable.
1) Select the function selector to CD (AUX) mode, when the AUX in cable is insert, the unit
will automatically switched from the CD mode to AUX, the auxiliary function will be ready
for using.
2) Turn your auxiliary
source ‘On’ and operate it as usual. The sound from the auxiliary
source will be heard through the speakers of this system.
3) Adjust the VOLUME+/- level as desired.
Noted: when both CD and AUX jack are available, the unit will default the sound source as
“AUX” mode. Once the AUX cable is disconnected, the unit will be back to CD mode again.
- - 9 - -
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw MiTone MITRC100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van MiTone MITRC100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info