658520
20
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
20
ENGLISH
3.3 Symbols on the Machine
A
Danger!
Disregard of the following
warnings may lead to serious per-
sonal injury or material damage.
Read instructions.
Band saw blade running
direction.
Operation of the quick
release lever
Unplug before servicing.
Information on the nameplate:
3.4 Safety Devices
Upper blade guard
The upper blade guard (35) protects
against unintentional contact with the
saw blade and from chips flying about.
In order for the upper blade guard to pro-
vide adequate protection against contact
with the band saw blade, it must always
be set as close as possible against the
work piece (distance 3
mm max.).
Lower blade guard
The lower blade guard (36) protects
against inadvertent contact with the band
saw blade below the saw table.
The lower blade guard must be installed
during operation.
Housing doors
The housing doors (37) protect against
contact with the rotating parts inside the
machine.
The housing doors are equipped with
interlocking contacts. These turn the
motor OFF when one housing door is
opened while the saw is running.
The housing doors must be closed while
the machine is in use.
Push stick
The push stick serves as an extension of
the hand and protects against accidental
contact with the saw blade.
The push stick must always be used if
the distance between band saw blade
and a rip fence is less than 120
mm.
Guide the push stick at an angle of 20
30 against the saw table's surface.
When the push stick is not used it can be
stored on the push stick holder provided
at the band saw frame.
Replace push stick if damaged.
Set upper blade guide to its lowest
position.
Remove projecting accessories.
Do not lift or transport the saw at the
safety installations.
Lift the saw at the table or transport
handle and then move it on the
transport castors.
Transport the saw with the help of
another person.
Transport in the original packaging
where possible.
3
Note:
In this chapter the essential oper-
ating elements of the machine are intro-
duced.
The proper use of the machine is
described in chapter "Operation". Read
this chapter before using the saw for the
first time.
ON/OFF Switch
Switching on = press green switch
(38).
Switching off = press red switch
(39).
In the event of a voltage failure an under-
voltage relay will trip. This prevents the
machine from starting up when the power
is restored. To restart, the green switch
button must be pressed.
Housing door turn-lock fastener
Open and close the housing door using
the turn-lock fastener
(40).
(27) Manufacturer
(28) Serial number
(29) Model number
(30) Motor specifications (see also
"Technical Specifications")
(31) Date of manufacture
(32) CE-mark – This machine con-
forms to the EC directives as per
Declaration of Conformity
(33) Waste disposal symbol –
Machine can be disposed of by
returning it to the manufacturer
(34) Dimensions of approved band
saw blades
28
29
30
31 32 34
27
33
35
36
37
4. Transport
5. Machine Details
38
39
40
20

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Metabo-BAS-317-Precision

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo BAS 317 Precision bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo BAS 317 Precision in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 6,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Metabo BAS 317 Precision

Metabo BAS 317 Precision Gebruiksaanwijzing - Nederlands, Português, Espanõl - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info