20.Do not use for commercial or medical purposes.
21.It is recommended that you weigh yourself at the same time each day.
22.The measurements given by the scales can be misleading if you weigh yourself after
intense exercise, during a strict diet or if you are dehydrated.
23.Children under 10 years of age and the elderly may use only the weight measurement
option. The results of measurement options (amount of water, fat or muscle) can be
misleading for people over 70 years of age and people who practise bodybuilding.
24.The device is not intended for pregnant women, people undergoing dialysis, people
with heart pacemakers and other medical implants.
25.If your measurements differ from the norm, consult a physician.
DESCRIPTION OF THE DEVICE (Fig. 1)
4.1 - Function keys:
a) Up button b) Down Button c) On button / parameter change button
1.2 - LCD display 1.3 - Glass platform 1.4 - Measurement plates
LCD DISPLAY (Fig. 3):
3.1 - User memory code 3.2 - Fat status indication
3.3 - Gender 3.4 - Weight unit
3.5 - Visceral fat 3.6 - Calorie intake recommendation
3.7 - Body fat % 3.8 - Height unit
3.9 - Body hydration % 3.10 - Age
3.11 - Body muscle % 3.12 - Percentage proportion
3.13 - Body bone 3.14 - Body mass index
BEFORE FIRST USE
Insert the correct batteries into the compartment (See “Replacing the battery”)
WEIGHING
1) Place the scales on a hard and flat surface (avoid carpets and soft surfaces).
2) Gently step on the scales. Stand on the scales evenly distributing your weight and do not move until your weight reading shown on
the display stops changing and gets blocked.
SETTING MEASUREMENT PARAMETERS
1) Place the scales on a hard and flat surface
2) Press the (c) button. An option to set the user code will appear.
3) Use the (a) and (b) buttons to choose a user code.
4) Press (c) to confirm.
Repeat steps 3 to 4 to set the gender, height and age. After approximately a few seconds from the last press of the SET button the
scales will switch to the weighing and measuring mode.
WEIGHING WITH MEASUREMENT
1) Press the (c) button. The last user's parameters will appear. If you want to change the user or parameters use the (a) and (b)
buttons. Wait until the display shows "0".
2) Gently step on the scales with bare feet. Both feet should touch the measurement plates (1.4). Stand on the scales evenly
distributing your weight and do not move until your weight reading shown on the display stops changing and the measurement sign:
0000 appears.
Next a sequence of fat, water, muscle, bone and calorie measurements results will appear. They will be repeated three times and
saved to the scales memory.
MEASUREMENT CONTROL
The results of the previous measurement can be retrieved using the (c) button after turning the scales on. Next, select the user code
and wait several seconds until the scales display “0”. Using the (a) and (b) buttons switch between the results.
SELECTING UNITS OF MEASURE (Fig. 2):
Press the UNIT button to change the units of measure. The unit will be visible on the display.
MESSAGES
C - Error
Lo – Low battery
Err – Excessive scale load
0000 - During measurement
REPLACING THE BATTERY
Remove the lid of the battery compartment at the bottom of the scale. Remove the old battery. Insert the new battery of the right type.
Close the lid of the battery compartment.
5
