669487
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
2
1
3
1
Power supply 230 V AC +10%, -15%,
50/60 Hz
2
Leaet holder slot
3
Sealed swivel cover
4
Output contact
5
Brightness sensor
6
ON override external command input
7
Back-lit LCD screen
8 9
10
Date; Time; Day 1 = Monday,
Day 2 = Tuesday, etc.
11
Output contact status (On, Off)
12
Viewing ON periods by 1
h
segment
13
Operating mode: "AUTO", "PROG":
programming, "
": time resetting,
"MAN": "HOLIDAY" programming, "
":
adapt conguration
The IC2000P+ controls lighting according to brightness AND the time of the day.
IF brightness is less than the set threshold (light sensitive function: IC)
AND IF the time program allows relay closing (time function: IH),
THEN the lighting circuit is activated.
14
Operation indication " " ON override,
"
" holidays
15
Programming help and status
pictogram: "
" lighting,
"
" switch-off, " " programmed
switch-off,
16
"AM" morning, "PM" afternoon,
"s" seconds, "lx" lux, "min" minutes
17
"Menu" Selection of operating modes
18
"-", "+" Value setting and navigation
keys
19
"ok" Flashing information validation
key.
To reset, press simultaneously on the
3 keys "-", "menu" and "ok", i.e.
17
,
18
(-) and
19
.
The pictograms " ", " " ash during the time
delay phase (switch-on and switch-off).
IH function
Brightness
Threshold
IC function
IC2000P+
output
Status picto.
displayed
15
IC2000P+
output
Status picto.
displayed
15
On energisation or after having reset (see the New Features chapter):
b Select the language (FRANÇAIS, ENGLISH, etc.)
b Set the year, month, day and time
b Choose between three pre-set time programs in your IC2000P+:
v "DAYPROG": ON time programming from 7
h
to 20
h
V validation of the IC function
from 7
h
to 20
h
v "NIGHTPROG": ON time programming from 5
h
to 8
h
and from 18
h
to 23
h
V
validation of the IC function on these two operating periods
v "EMPTYPROG": OFF time programming the entire day V no validation of the IC
function.
These programs can be modied by going to the program menu when the
conguration phase is nished (modication of times, operating periods, etc.)
b Set your brightness threshold using the "+" and "-" keys, either starting from the
previously entered value, or from the measured value (2 lux if there is no mains
supply or sensor).
The following information can be read on the display:
The position of the threshold in the range (bargraph)
The brightness range (350-2100)
Brightness above the threshold " ", below the threshold " "
The threshold value (1400 lux)
b Validate your choice by pressing "ok".
Once this phase is over, your IC2000P+ moves to the "AUTO" mode and
operates with the items dened above (time program and threshold).
If you do not agree with the ashing word or value: scroll down the display
using the "-" and "+" keys.
To conrm the ashing word or value: validate using "ok".
If you are lost: press "Menu" to return to the "AUTO" mode without saving the last
change.
If you press no key for 2 minutes: return is automatic to the "AUTO" mode
without saving.
External input (ON override
6
)
4
Access the "PROG" mode by pressing the "Menu" key; the "PROG" mode is used to manage the IH time programs of your IC2000P+,
by means of ve options:
b "NEW" to dene a new program (if the "EMPTYPROG" program has been chosen in the "Congure" phase), or add ACTIVE, INACTIVE
commands to the two other pre-set time programs: "DAYPROG" and "NIGHTPROG":
v "SAVE": to save the new switching operation
v "COPY": to repeat this switching operation for the other days of the week
b "CHECK" to view the programs
b "MODIFY" to change the program already memorised
b "CLEAR" to delete the program partially or totally (the date, time and language are kept):
v "SINGLE" deletes programming of the chosen switching operations
v "ALL OFF" deletes the programming of all the days of the week
b "FINISH" to leave the "PROG" mode and return to the "AUTO" mode.
Congure
New features
Cable
en
IC2000P+: 15483
Programmable Light
Sensitive Switch
(2-2100 lux)
and wall-mounted cell
Program "PROG"
ON
OFF
24 6
24 6
100 m maxi 100 m maxi
ON override
external contact
(option)
max. Ø 4
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Merlin-Gerin-IC2000P

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Merlin Gerin IC2000P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Merlin Gerin IC2000P in de taal/talen: Engels als bijlage per email.

De handleiding is 0,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Merlin Gerin IC2000P

Merlin Gerin IC2000P Gebruiksaanwijzing - Nederlands - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info