743094
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
DE Kontrolllösung zur
Eigenanwendung
Benutzen Sie die Medisana-Kontrolllösung nur zusammen mit den
MediTouch- und GlucoDock-Teststreifen. G
Schreiben Sie das Öffnungsdatum auf das Etikett des Behälters. Die
Kontrolllösung bleibt von der Öffnung des Behälters an ca. drei Monate oder
bis zum Verfallsdatum verwendbar, je nach dem, was zuerst zutrifft.
Verwenden Sie die Kontrolllösung nicht über das Verfallsdatum hinaus.
Die Umgebungstemperatur bei Gebrauch der Kontrolllösung darf zwischen
10 °C - 40 °C (50 °F - 104 °F) liegen. G
Die maximalen Temperaturwerte r Aufbewahrung und Transport der
Kontrolllösung liegen zwischen 2 °C und 30 °C (35.6 °F 86 °F). Bewahren
Sie die Lösung nicht im Kühlschrank auf und frieren Sie sie nicht ein. G
Schütteln Sie die Flasche mit der Testlösung gut, bevor Sie sie öffnen.
Wischen Sie den ersten Tropfen mit einem sauberen Tuch ab und verwenden
Sie den zweiten, um eine gute Probe für genaue Messergebnisse zu erhalten.
Damit die Kontrolllösung nicht verunreinigt wird, wischen Sie Lösungsreste
mit einem sauberen Tuch von der Spitze des Behälters, bevor Sie diesen
wieder verschließen. G
Die Kontrolllösung kann auf Kleidung Flecken verursachen. Waschen Sie
ggf. die verunreinigten Textilien sofort mit Wasser und Seife aus. G
Überschüssige Kontrolllösung nicht zurück in den Behälter geben. G
Schließen Sie den Behälter nach jedem Gebrauch sorgfältig. G
MEDISANA Servicecenter
c/o GSL mbH
Am Weimarer Berg 6
99510 Apolda
Tel.: 01805 45 40 15
(0,14 €/min aus dem deutschen Festnetz;
Mobilfunk Hochstpreis 0,42 €/min)
eMail: Vitadock-info@medisana.de
79029 12/2014
Zeichenerklärung
Diese Gebrauchsanweisung gehört zu dieser Blutzuckerkontroll-
lösung. Sie enthält wichtige Informationen zum Gebrauch. Lesen
Sie diese Gebrauchsanweisung vollständig. Die Nichtbeachtung
dieser Anweisung kann zu schweren Verletzungen oder Schäden
führen. G
Medizinische „In vitro“- Diagnose-Kontrolllösung (nur zur äußeren
Anwendung) G
Kontrolllösung G
LOT-Nummer G
Produkt-Nummer G
Lagertemperaturbereich G
Hersteller G
Verfallsdatum G
Diese Blutzuckerkontrolllösung entspricht den Anforderungen der
EG-Richtlinie 98/79 für “In Vitro” Diagnostika und ist mit dem CE-
Zeichen (Konformitätszeichen) „CE 0483“versehen. G
Gebrauchsanweisung
GB Control solution
for self-testing
Only use the Medisana control solution with the MediTouch and GlucoDock
test strips. G
Write the opening date on the label of the container. The control solution can
be used for approx. three months after opening the container or until the
expiry date, whichever comes first. Do not use the control solution after the
expiry date. G
The ambient temperature for using the control solution should lie between
10 °C - 40 °C (50 °F - 104 °F). G
The temperatures for storing and transporting the control solution should lie
between min 2 °C and max 30 °C (35.6 °F – 86 °F). Do not store the solution
in the refrigerator and do not freeze it. G
Shake the bottle with the control solution well before you open it. G
Wipe away the first drop with a clean cloth and use the second drop to ensure
you get a good sample for a precise reading. G
To ensure the control solution does not get contaminated, wipe the remaining
solution on the tip of the container with a clean cloth before closing it again.
The control solution may stain your clothing. If this is the case, rinse the soiled
clothing immediately in water and detergent. G
Do not put any excess control solution back into the container. G
Close the container carefully after every use. G
Service:
Murrays Health & Beatuy
School Lane, Chandlers Ford
Hampshire
UK SO534YN
Tel.: +44/ 238 0460 600
email: cservices@paulmurrayplc.co.uk
Explanation of symbols
This instruction manual is for this blood glucose control solution. It
contains important information about starting up and operation.
Read the instruction manual thoroughly. Non-observance of these
instructions can result in serious injury or damage to the device.
Control solution for medical in vitro diagnosis (for external use
only) G
Control solution G
LOT number G
Catalogue number G
Storage temperature limitation G
Manufacturer G
Use by G
This blood glucose control solution corresponds to the require-
ments of the EU guidelines 98/79 for in vitro diagnostics and bears
the CE marking (conformance label) CE 0483. G
Instruction Manual
FR Solution de contrôle
pour faire son
propre diagnostic
Utilisez la solution de contrôle Medisana uniquement avec les bandelettes
MediTouch et GlucoDock. G
Ecrivez la date d'ouverture sur l'étiquette de la boîte. Utilisez la solution de
contrôle dans les trois mois suivant l'ouverture de la boîte ou jusqu'à la date de
péremption si celle-ci est antérieure. G
N'utilisez pas la solution de contrôle après la date de péremption. G
Lors de l'utilisation de la solution de contrôle, la température ambiante doit être
comprise entre 10 °C et 40 °C (50 °F – 104 °F). G
Conservez et transportez la solution de contrôle à une température comprise
entre 2 °C et 30 °C (35.6 °F – 86 °F). Ne conservez pas la solution de contrôle
au réfrigérateur et ne la congelez pas. G
Bien agiter la bouteille avant de l'ouvrir. Essuyez la première goutte à l'aide d'un
chiffon propre et utilisez la seconde pour un pour obtenir un bon échantillon et
des résultats exacts. G
Afin d'éviter toute contamination, essuyez le bout de la bouteille à l'aide d'un
chiffon propre avant de la refermer. G
La solution de contrôle peut tacher les habits. Le cas échéant, laver immédia-
tement les textiles salis avec de l'eau et du savon. G
Ne pas verser le reste de la solution de contrôle dans la bouteille. G
Refermez la bouteille avec précaution après chaque utilisation. G
Légende
Cette notice d'utilisation correspond à cette solution de contrôle de
la glycémie. Elle contient d'importantes informations pour son
utilisation. Lisez cette notice d'utilisation en intégralité. Le non-
respect de cette consigne peut conduire à de graves blessures ou
dommages. G
Solution de contrôle pour diagnostic in vitro (usage externe
uniquement) G
Solution de contrôle G
N° de lot G
N° du produit G
Température de stockage G
Fabricant G
Date de péremption G
Cette solution de contrôle de la glycémie est conforme aux exigen-
ces de la directive 98/97/CE relative aux dispositifs de diagnostic in
vitro et dispose du symbole CE (symbole de conformité) "CE 0483".
Mode d’emploi
IT Soluzione di
controllo pre
autodiagnosi
Utilizzare la soluzione di controllo Medisana solo insieme alle strisce reattive
MediTouch e GlucoDock. G
Scrivere la data di apertura sull'etichetta del contenitore. Dall'apertura del
contenitore, la soluzione di controllo potrà essere utilizzata fino alla data di
scadenza e comunque per un periodo di tempo non superiore a tre mesi. G
Evitare di utilizzare la soluzione di controllo per un periodo di tempo superiore
alla data di scadenza. G
La temperatura ambiente al momento dell'utilizzo della soluzione di controllo
non può essere compresa tra i 10 °C - 40 °C (50 °F - 104 °F). G
I valori di temperatura massimi per la conservazione e il trasporto della
soluzione di controllo sono compresi tra 2 °C e 30 °C (35.6 °F 86 °F). Non
conservare la soluzione in frigorifero e non congelarla. G
Agitare bene la bottiglia con la soluzione per il test prima di aprirla. Asciugare la
prima goccia con uno strofinaccio pulito e utilizzare la seconda per ottenere un
buon campione per risultati di misurazione precisi. G
Affinché la soluzione di controllo non sia impura, asciugare i resti della soluzione
con uno strofinaccio pulito dalla punta del contenitore prima di sigillarli di nuovo.
La soluzione di controllo può provocare macchie sulle stoffe. Eventualmente,
sciacquare immediatamente le stoffe non pulite con acqua e sapone. G
Non reimmettere la soluzione di controllo in eccesso nel contenitore. G
Chiudere con cura il contenitore ad ogni uso. G
Spiegazione dei simboli
Queste indicazioni per l'uso fanno parte di questa soluzione di
controllo della glicemia. Contengono importanti informazioni per
l'uso. Leggere per intero le presenti istruzioni per l'uso. La mancata
osservazione di queste indicazioni può portare a pesanti lesioni o a
danni. G
La soluzione di controllo per la diagnosi medica „In vitro“ (solo
per applicazione esterna) G
Soluzione di controllo G
Numero LOT G
Numero del prodotto G
Temperatura di stoccagio G
Produttore G
Data di scadenza G
Questa soluzione di controllo della glicemia è conforme ai requisiti
delle linee guida comunitarie 98/79 per le diagnosi “In Vitro” ed è
provvista del marchio „CE 0483“ (marchio di conformità) che ne
comprova la conformità.
Istruzioni per l’uso
AF Italia srl
Via Monte Rosa, 28
20863 Concorezzo (MB)
Italy
Tel.: 039 - 8951381
eMail: medisana@afitalia.it
Internet: www.afitalia.it
Opaya Group
10 Boulevard du Parc
92200 Neuilly sur Seine
Tel. 0811 560 952
eMail: info@medisana.fr
3
3 Monate nach Öffnung
entsorgen
3
Discard 3 months after
opening
3
Éliminer 3 mois après
ouverture
3
Smaltire 3 mesi dopo
l'apertura
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Medisana MediTouch - GlucoDock Control Solution - 79029 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Medisana MediTouch - GlucoDock Control Solution - 79029 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info