Note: This is a useful function if the charging
station is placed below a veranda or in another
limited space area. Choosing a good starting
point is important so that the guide calibration
process is optimized.
1. Do steps 1-3 in
To get access to the menu
on page 20
.
2. Use the arrow button and the OK button to
move through the menu structure
Settings >
Installation > Starting point
.
3. Use the arrow buttons to specify the
distance in cm.
4. Push the BACK button.
3.10.7 To set the Drive Past Wire
function
The front of the product always moves past the
boundary wire by a specified distance before the
product moves back into the work area. The
factory setting is 30 cm. You can select a
distance of 20-40 cm.
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow button and the OK button to
move through the menu structure
Settings >
Installation > Drive Past Wire
.
3. Use the arrow buttons to set the distance in
cm.
4. Push the BACK button.
3.10.8 ECO mode
ECO mode
stops the signal in the boundary loop,
the guide wire and the charging station, when the
product is parked or is charging.
Note: Use
ECO mode
if the signal from the
charging station causes interference with other
wireless equipment, for example hearing loops or
garage doors.
Note: Push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
3.10.8.1 To set the ECO mode
1.
Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Installation > ECO mode
.
3. Push the OK button to select the
ECO
mode
.
4. Push the BACK button.
3.10.9 To avoid collisions with the
mower house
The wear on the product and the mower house
decreases when you select
Avoid house
collisions
.
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings >
Installation > Mower house > Avoid house
collisions
.
3. Push the BACK button.
Note: If
Avoid house collisions
is selected it can
result in grass that is not cut around the charging
station.
3.10.10 Bluetooth
®
The product can connect to mobile devices that
have the McCULLOCH
app installed.
McCULLOCH is a free app for your mobile
device. The short-range interaction with the
product is called Bluetooth
®
. When pairing
between the product and app has been
confirmed, you have access to the menus and
functions as long as you are within short-range
(Bluetooth
®
).
3.10.10.1 To install the McCULLOCH app
1. Download the McCULLOCH app on your
mobile device.
2. Register in the McCULLOCH app.
3. Log in to your McCulloch account in the
McCULLOCH app.
3.10.10.2 To pair the McCULLOCH app and
the product
1. Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button
to move through the menu structure
Settings
> Installation > Bluetooth > New pairing
.
24 - Installation 985 - 004 - 22.01.2019
