4. Push the OK button to confirm the chosen
inactive day(s).
5.
The wizard suggests a daily schedule for the
active days. If you want to move the
schedule interval to earlier or later in the day
then push the arrow buttons up or down.
6. Push the OK button to confirm the daily
schedule. An overview of the daily schedule
is presented. Push the OK button to go back
to main menu.
Note: To change the schedule settings for
individual work days use the
Schedule -
Advanced
menu.
3.10.2.2 To calculate the schedule setting
1.
Calculate the dimension of your lawn in m
2
/
yd
2
.
2. Divide the m
2
/ yd
2
of the lawn with the
approximate operation capacity. Refer to
table below.
3. The result is equal to the number of hours
that the product must operate each day. The
number of hours includes both operation
and charging time.
Note: The operation capacity is approximate and
schedule settings can be adjusted.
Model Approximate operation
capacity, m
2
/ yd
2
/ h
600 m
2
42 / 50
500 m
2
41 / 49
400 m
2
40 / 48
Example: A lawn of 500 m
2
/ 600 yd
2
, cut with a
product specified for
600 m
2
.
500 m
2
/ 42 ≈ 7 h.
600 yd
2
/ 50 ≈ 7 h.
Days /
week
h / day Schedule settings
7 7 07:00 - 14:00 / 7:00
am - 2:00 pm
3.10.2.3 To set the schedule
1.
Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button
to move through the menu structure
Schedule > Advanced > Overview
.
3. Use the arrow buttons and the OK button
to select the day.
4. Use the left arrow button to select the
period.
5. Push the OK button.
6. Enter the time with the arrow buttons. The
product can cut the grass 1 or 2 periods
each day.
7. If the product must not cut grass on a
specified day, unselect the box adjacent to
the 2 time periods.
3.10.2.4 To copy the schedule setting
1.
Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button
to move through the menu structure
Schedule > Advanced > Overview > Copy
.
3. Use the arrow buttons and the OK button
to copy the schedule setting. You can copy
the schedule settings day to day or for the
full week.
3.10.2.5 To reset the schedule setting
You can remove all schedule settings and use
the factory setting.
1.
Do steps 1–3 in
To get access to the menu
on page 20
.
2. Use the arrow buttons and the OK button
to move through the menu structure
Schedule > Advanced > Overview > Reset
.
985 - 004 - 22.01.2019 Installation - 21
