650498
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
SuperLoader 3 Quick Start Guide
an environment compatible with the manufacturer’s
maximum recommended ambient temperature.
Reduced Air Flow 0
Installation of the equipment in a rack should be such that
the amount of air flow required for safe operation of the
equipment is not compromised.
Mechanical Loading 0
Mounting of the equipment in a rack should be such that a
hazardous condition is not achieved due to uneven
mechanical loading.
Overloading the Circuit 0
Consideration should be given to the connection of the
equipment to the supply circuit and the effect that
overloading of circuits might have on overcurrent
protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when
addressing the concern.
Reliable Earthing
(Grounding) 0
Reliable earthing of rack-mounted equipment should be
maintained. Particular attention should be given to supply
connections other than direct connections to the branch
circuit, such as use of power strips.
Understanding Autoloader Features 0
The autoloader is compatible with most operating systems
and environments that support the SCSI interface, but
requires either direct support from the operating system or
a compatible backup application to take full advantage of
its many features.
Bar Code Reader 0
The bar code reader is enclosed within the body of the
autoloader. The bar code reader automatically scans each
cartridge in the magazine upon power up, after a reset,
after an import or export, or when a re-inventory command
is issued. Beyond that, there is no user interface with the bar
code reader via the front panel operator controls or LCD
screen. The information from each label is stored in memory
and available through SCSI and On-board Remote
Management to the computer's operating system or backup
application upon request.
If utilizing the bar code reader, you must apply or slide the
bar code labels into the appropriate slot on the front of
each cartridge. The labels must conform to ANSI/AIM BC1 -
1995 Uniform Symbology Specification Code 39. A set of
bar code labels is initially included with the autoloader.
Refer to www.quantum.com
for information on obtaining
additional bar code labels.
Product Overview 0
Figure 1 Front Panel Controls
Figure 2 Back Panel Overview
1 Power switch
2Mailslot
3 Front panel LEDs
4 Front panel LCD screen
5 Function keys
6 Left magazine (or blank)
7Right magazine (or blank)
1 68-pin HD SCSI connectors
2Fan vent
3 Power connector
4 Ethernet connector
5 Power switch
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxdata Quantum SuperLoader 3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxdata Quantum SuperLoader 3 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Maxdata Quantum SuperLoader 3

Maxdata Quantum SuperLoader 3 Snelstart handleiding - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info