785590
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
2 September 2009 / MasterBus Repeater / EN
1 GENERAL INFORMATION
1.1 Use of this manual
Copyright © 2009 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part
or all of the contents in this document in any form
without the prior written permission of Mastervolt is
prohibited.
This manual serves as a guideline for the safe and
effective operation of the MasterBus Repeater.
Keep this manual at a secure place!
1.2 Guarantee specifications
Mastervolt guarantees that this product was built
according to the legally applicable standards and
stipulations. If you fail to act in accordance with the
regulations, instructions and stipulations in this
user’s manual, damage can occur and/or the
product will not fulfil the specifications. This may
mean that the guarantee will become null and void.
IMPORTANT: Additional warranty agreements, like
“Mastervolt system warranty” may contain
restrictions which forbid resetting of historical data
The standard guarantee period is two years after
date of purchase.
1.3 Liability
Mastervolt can accept no liability for:
consequential damage due to use of the
MasterBus Repeater;
possible errors in the manuals and their results;
Use that is inconsistent with the purpose of the
product.
CAUTION!
Never remove the identification label.
2 OPERATION
2.1 Repeater functions
The MasterBus repeater features two functions:
1. It refreshes the MasterBus data for further
transportation. This is useful when data has to be
transported by long cables. There are three
refreshing modes: Off, Smart and On.
2. It powers the MasterBus network. The Repeater
offers the choice between high and low powering
mode. Both modes supply the same power, but low
powering devices give priority to high powering
devices when MasterBus powering is needed. This
means that when using more battery banks, you
save one bank by setting the connected Repeater to
low powering. This is convenient for small
unmonitored battery banks.
2.2 MasterBus functions
The table below shows the Repeater’s MasterBus
functions. These functions can be visualised by
means of a MasterView display or the free
downloadable MasterAdjust software.
Monitoring Description Default Range
Device state If the repeater state is OK, it is shown here. OK OK, -
Configuration
Language Set the MasterBus Repeater menu language English See
specifications
Name Any name you wish with 12 characters max MRP
Repeater
12 characters
max
Repeater mode The repeater can be switched Off, Smart or On. In all
cases, power supply is functional if 8-35V DC is connected.
Off: no data transport. In this mode, MasterBus is divided
into two separate networks!
On: all data is refreshed by the Repeater.
Smart: data is refreshed only if the data receiver is at the
other side of the repeater (less data traffic).
On Off, Smart, On
Power mode The Repeater can be set to low and high powering,
see also Specifications.
High Low, High
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt MasterBus Repeater bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt MasterBus Repeater in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0.45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info