785621
5
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
ENGLISH
5
Installation
Be sure that the output of the supplying source is switched off during installation. Also be sure that
no consumers are connected to the batteries during installation, to prevent hazardous situations.
Install the Charge Mate Pro not only as close as possible to the supplying source, but to the
batteries as well. The Charge Mate Pro must be installed in a well-ventilated environment, as high
currents will heat up the Charge Mate Pro. Preferably, the Charge Mate Pro should be mounted on
a flat metal surface, with the fins vertical.
Check the installation drawing for correct connection.
Use the template from the packaging to determine the exact location and screw holes for mounting
of the device.
Install the Charge Mate Pro in the positive lead between the battery banks.
Connect the negative of the battery banks to the Charge Mate Pro
Optionally you can install a remote status light to the Status output and A+.
Do not install the Charge Mate Pro directly above the batteries because of possible
corrosive sulphur fumes.
Remote switch (optional)
Optionally you can install a single pole ON-OFF-ON switch for remote operation of the Charge Mate
Pro, see installation drawing on page 2.
Remote switch functions
ON
Switches input to 12/24 V.
The battery banks are connected in parallel and bi-directional without current limit.
PULSE
Switches input to 12/24 V for a short time.
Emergency start (battery banks are connected for 30 seconds without current limit)
OFF
Switches input to Ground. The Charge Mate Pro is switched off.
AUTOMATIC
Let the Switch input floating (or no switch connected).
Default automatic mode with 40A / 90A fixed current limit.
LED indicators
The green status led is continuous lit when there is an electrical connection between A+ and B+.
The red warning led is lit when there is no electrical connection between A+ and B+.
Warning LED
1 blink
Overvoltage
The voltage on A+ and/or B+ has been above 15,5/31 V for more than 1 s. The warning
disappears when voltage drops below 15/30 V for more than 10 s.
2 blinks
High voltage differential
A voltage differential between A+ and B+ has been detected of more than 8/16 V for more than 2,5
s. The warning disappears when the voltage differential drops below 8/16 V for more than 2,5 s.
3 blinks
Temperature too high (75 °C / 167 °F)
This warning disappears when the temperature drops below 65 °C/ 149 °F.
4 blinks
Reverse current
Reverse current detected from B+ to A+ for more than 2s. Disappears after 20 s.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt Charge Mate Pro 40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt Charge Mate Pro 40 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0.89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info