442883
3
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
2
Introduction
Of all the retro effects to hit the shops in recent years, perhaps
the most authentic and coolest is tremolo. Instantly calling up
the spirit of the 60s, Tremolo was the first effect to appear on a
Marshall amp in the early 1960s. The late 90s sees Marshall
updating the tremolo effect in the form of the Vibratrem.
By using split phase modulation a truely awesome stereo sound
field can be created by connecting the VT-1 up to two amplifiers.
The Vibratrem features a passive bypass for the main signal path
to ensure complete tonal integrity and has a quality of tone
matched only by its versatility.
Here follows a complete run down of the Vibratrem's features for
your information. We have also enclosed a number of suggested
settings to help guide you. It should be remembered though that
these are only suggested settings and you should really take the
time to experiment.
If you take the time to explore the different effects within the
Vibratrem, you won’t be disappointed.
Features
1. ‘Out 2’ Jack Socket
The Vibratrem is a stereo footpedal. If you are using the
Vibratrem in a stereo configuration this Jack socket is for your
second output.
2. ‘Out 1 - Mono’ Jack Socket
This is the main output of the Vibratrem and is for connection to
the amplifier or to another effects pedal.
3. Mode
This allows you to switch between the Vibratrem's two modes,
Vibrato and Tremolo.
Tremolo - refers to change in signal volume. In Tremolo mode
the signal increases and decreases at a role governed by the
speed control. The tremolo on the VT-1 is specially designed to
recreate the natural swell and decay of a valve-based tremolo as
found on many vintage valve amplifiers.
Vibrato - By phase shifting the effected signal with respect to
direct, uneffected signal, a subtle pitch shifting vibrato is
created. The vibrato on the VT-1 has been developed to closely
mimic the vibrato settings on certain vintage valve amplifiers.
Note: the stereo output remains unchanged (i.e. tremolo) in
vibrato mode.
Always use good quality shielded leads.
Always use 9V regulated DC supply with centre negative.
Setting Up
3
ENGLISH
Although it may seem obvious the first action in achieving a
good effected sound (be it duration / compression etc.) is to find
the perfect bypassed sound. This will then allow the correct level
to be set with the effect unit to allow a cut or boost in volume
and a realistic tone.
On clean channels it is advisable to set the gain (or volume) to a
setting of no less than one quarter maximum so as not to get
unrealistic results due to any volume dependent tonal shaping on
the amplifier preamp.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marshall VT-1 Vibratetrem bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marshall VT-1 Vibratetrem in de taal/talen: Engels als bijlage per email.

De handleiding is 0,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info