706092
2
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
ENGLISH
WARNING! IMPORTANT SAFETY
INSTRUCTIONS
Please read the instrucon manual for this speaker cabinet and any other
equipment to be used with this speaker cabinet carefully before use.
1. Read these instructions.
2. Follow all instructions and heed all warnings.
3. Do not attempt to remove or re-wire the internal speakers or any other
components within the speaker cabinet.
4. Never use a speaker cabinet or associated equipment in damp or
wet conditions. No objects lled with liquids should be placed on the
apparatus.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. No naked ame sources, such as lighted candles, should be placed on the
apparatus.
10. Ensure any associated equipment is switched off and unplugged from the
mains in the event of lightning storms or if unused for long periods of time.
11. Only use attachments/accessories specied by the manufacturer.
12. Always ensure all associated equipment is switched off and unplugged from
the mains before connecting or disconnecting the speaker cabinet.
13. Always ensure that the supplied speaker lead is used to connect the
speaker cabinet to associated equipment. Always plug the speaker lead
into the speaker cabinet before plugging it into the amplier.
14. Protect the speaker lead from being walked on, pinched or having heavy
objects rolled over it. Ensure the speaker lead is not entangled with any
other lead. If a replacement speaker lead is required, please contact your
authorised Marshall Dealer.
15. If the speaker cabinet has switchable impedance, please ensure that
the correct impedance is selected and that any associated equipment
impedance settings are also correctly set.
16. If the speaker cabinet has mono/stereo switching capability, ensure that
the switch is in the correct position for the desired operation.
17. Always move or transport speaker cabinets individually. Never attempt
to move or transport speaker cabinets if they have other cabinets or
associated equipment stacked on or under them.
18. Always ensure that the speaker cabinet is on a level surface, whether
used or stored individually, or as a speaker cabinet stack, and/or with
associated equipment placed underneath or on top.
19. Marshall speaker cabinets should only be stacked with compatible
Marshall speaker cabinets. Never attempt to stack another
manufacturers speaker cabinet with a Marshall speaker cabinet. If you
are unsure, contact your authorised Marshall Dealer.
20. Refer all servicing to qualied personnel. Servicing is required when the
speaker cabinet has been damaged in any way, such as liquid being spilled
or objects falling into it, the speaker cabinet being exposed to rain or
moisture, the speaker cabinet not operating normally or being dropped or
damaged in any way
KEEP THESE INSTRUCTIONS.
GETTING STARTED
Congratulations on purchasing your Marshall cabinet. Our cabinets are
designed with you in mind, with each speaker specially selected for its tone and
each unit lovingly crafted. We’ve got over 50 years’ worth of experience and this
allows us to deliver meticulously planned, high quality products. From major
international festivals and multi-million pound recording studios to local bars
and bedroom band practice, our cabinets are built to stand the test of time and
full all your performance needs.
4x12” mono/stereo switching facilies
To ensure maximum exibility, some of our 4x12” cabinets boast a mono/
stereo switching system on the back. When ‘stereo’ mode is selected, the
cabinet is split into two 8Ω ‘halves’ for use with a stereo amp. When ‘mono
is selected you are offered two different impedance inputs (4Ω or 16Ω)
to choose from. Always ensure you select the correct one to match the
impedance of your amplier and never use both inputs at the same time when
the cabinet is in ‘mono’ mode.
Single mono input
Some cabinets are tted with a single mono input socket. With this cabinet the
impedance and power rating are xed.
Use a suitable speaker cable to plug your guitar amplier into this socket.
Ensure the impedance and power handling of the cabinet is compatible with
your chosen amplier.
1) Mono/stereo selecon switch. Selects either stereo or mono mode.
2) Right input. When switch (1) is set to:
i) Stereo, this provides connection to the right* side pair of speakers. Rated
at 8Ω.
ii) Mono, this provides connection to all four speakers. Rated at 4Ω.
3) Le input. When switch (1) is set to:
i) Stereo, this provides connection to the left* side pair of speakers. Rated
at 8Ω.
ii) Mono, this provides connection to all four speakers. Rated at 16Ω.
*Right and le refer to the two stereo sides of the cabinet as seen when facing
the front of the cab.
2x12” stereo selecon facilies
Some of our 2x12” cabinets are tted with a mono/stereo selection plate on the
back. This enables you to split the cabinet into two halves for use with a stereo
set-up if you desire.
Mono usage: Use the input marked mono (1), the impedance of which is clearly
indicated above the jack.
Stereo usage: Use both inputs (1 and 2). Once again the impedance of each is
clearly marked.
300W RMS
150W / CH. STEREO
1
2
3
12
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Marshall VBC 412 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Marshall VBC 412 in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 4,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info